We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rockford Fosgate Punch P1 3.5 inch 2-way coaxial speaker black finish

Rockford Fosgate

Rockford Fosgate Punch P1 3.5" 2-Way Coaxial Car Speaker P132

SKU CH-61D9-1GS5N

3.5-inch two-way coaxial speakers with 20 W RMS power handling and 85 dB sensitivity

  • Speaker unit size3.5 in (8.89 cm)
  • Woofer materialPolypropylene
  • Peak wattage80 W
  • RMS power rating20 W
  • Audio sensitivity85 dB
  • Frequency range120 Hz
  • Clear mid-range from 85 dB sensitivity
  • 20 W RMS handles daily listening
  • 5" polypropylene cone fits tight spaces
  • VAST surround adds 25% cone area
  • ICC crossover hides components for clean install

Compact Punch P1 3.5" Coaxial

The Rockford Fosgate Punch P1 3.5" 2-way coaxial speaker fits factory locations that accept a three-and-a-half-inch driver. It is built for drivers who want a direct replacement with a mineral-filled polypropylene cone, butyl rubber surround and PEI dome tweeter. The ICC crossover is integrated for a tidy install. Buyers needing deeper bass extension or higher power handling should look elsewhere.

Verify mounting depth and cutout

Before ordering, confirm that your door or dash opening matches a 3.5" cutout and that the mounting depth clears the speaker frame and integrated crossover. The nominal impedance is 4 ohms, so check that your head unit or amplifier is stable at that load. Sensitivity is rated at 85 dB, meaning modest amplifier power will produce adequate volume. Ensure wiring polarity is observed for correct phase.

Sustained output at rated RMS

Under continuous operation each speaker handles 20 watts RMS, while the pair handles 40 watts RMS. The polypropylene cone and butyl surround maintain compliance during extended play, and the VAST surround geometry adds up to 25 percent more cone area for consistent output. Peak power is 80 watts per pair for brief transients. Thermal limits are governed by the 20-watt RMS rating, so prolonged high-level signals stay within that envelope.

How it compares

Measured against everything we stock in Car Stereo Speakers, at today’s prices. Recalculated every night.

Price $64.99
Cheaper than about 63% of the 379 comparable items (median $104.99).

Specifications

Product
Brand nameRockford Fosgate
Product linePunch P1
Product type2-way Speaker
Audio & video
Speaker unit size3.5 in (8.89 cm)
RMS power rating20 W
Audio sensitivity85 dB
Frequency range120 Hz
Rated impedance4 Ohm
Power
Peak wattage80 W
Size & build
Woofer materialPolypropylene

Questions about this item

What comes in the P132 box and what must I purchase separately?

The package contains two 3.5-inch Punch P1 coaxial speakers with built-in ICC crossovers, PEI dome tweeters, and VAST surrounds; speaker wire, mounting hardware, and an amplifier are not included.

Should I power the P132 with a head unit or an external amplifier?

Each speaker handles 20 watts RMS and 40 watts peak at 4 ohms, so a typical 20-watt-per-channel head unit will drive them cleanly, while an external amp up to 40 watts RMS per channel adds headroom.

How low will the 120 Hz frequency response play in my doors?

The 120 Hz lower limit means the woofers reproduce mid-bass down to that point; frequencies below 120 Hz will require a subwoofer or larger mid-bass drivers.

More in Car Stereo Speakers

Similar items