We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of zinc-plated steel sliding rails, three-section ball-bearing design, thin profile for 2U–5U server chassis

Rosewill

Rosewill RSV-RL20HV2 2U–5U Sliding Rail Kit 20″–33.5″ server accessory

SKU CH-1K0Y-F4ADH MPN RSV-RL20HV2

Adjustable 20″–33.5″ depth sliding rails support 2U–5U chassis up to 100 lbs with ball-bearing travel and quick-disconnect removal

  • Product typeBall Bearing Slide Rail
  • DetailsLoad rating up to 77 lb Profile: 25.63 in x 1.8 in x 0.5 in
  • Key features2U to 5U height, Adjustable 20 in to 33.5 in Depth Bearing S

Size 20" V2

  • Fits 2U–5U server chassis for versatile rack mounting
  • Adjustable 20″–33.5″ depth suits varied rack configurations
  • Ball-bearing slides deliver smooth, silent chassis extension
  • Load rating up to 77.00 lbs supports heavy equipment
  • Ultra-thin 0.50″ profile maximises usable chassis width

Slide Rail Kit for 2U–5U Chassis

The Rosewill RSV-RL20HV2 is a ball-bearing slide rail kit built for server chassis between 2U and 5U height. It fits standard racks with an adjustable mounting depth from 20" to 33.5". The zinc-plated finish meets ROHS requirements. Installers who need a different height range or a depth outside this window cannot use this kit.

Load Rating and Sustained Operation

The rails carry a load rating up to 77.00 lbs with a manufacturer highlight of 100 lbs. Ball bearings give precise linear motion with smooth, silent travel during repeated extensions. The 25.63" x 1.80" x 0.50" profile fits maximum chassis width of 426 mm. Builders whose equipment exceeds the stated load rating must choose a heavier-duty rail.

Installation and Common Issues

A quick-disconnect design and extra tapped screw holes on the outer member allow easy chassis removal and mounting. The kit works with all Rosewill server cases except models RSV-AI01 and RSV-L4620. Installers using those two excluded cases or non-standard rack posts will find the rails incompatible.

How it compares

Measured against everything we stock in Drive Cages & Server Add-Ons, at today’s prices. Recalculated every night.

Price $35.99
Cheaper than about 73% of the 1,119 comparable items (median $74.99).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameRosewill
Model nameRSV-RL20HV2
Product typeBall Bearing Slide Rail
Size & build
Shipping weight2.04 kg
Package size527 × 57 × 46 mm

Other versions of this model

1 more in the same range

Questions about this item

How much noise do the ball-bearing slides add when the chassis is pulled out for daily maintenance?

The zinc-plated ball-bearing rails provide smooth, silent travel, so the sliding action adds no audible noise during routine access.

Which rack posts and chassis dimensions must already be in place for this kit to mount correctly?

You need a standard rack with front-to-rear post spacing between 20" and 33.5" and a server chassis 2U–5U high, up to 426 mm wide, with side mounting holes.

Will the 25.63" x 1.80" x 0.50" profile clear the side panels on an older 4U Rosewill case I plan to keep?

The extremely thin 1.80" rail height and quick-disconnect outer member are designed to fit maximum chassis width, allowing removal without panel interference on compatible Rosewill cases.

More in Drive Cages & Server Add-Ons

Similar items