RUNCO 151-1025-00 projector lamp 250W 2000 hrs
Replacement projector lamp module with 250W bulb rated for 2000 hours, supplied pre-assembled for direct installation
- Power rating250 W
- Lamp lifespan2,000 Hrs.
- Product typeProject Lamp
- Ready-to-install module with 250W NSH bulb and housing included
- 2,000-hour rated lamp life supports extended viewing sessions
- Manufactured to ISO 9001 quality standards for reliable performance
- OEM-compatible replacement matches original Runco 151-1025-00 specifications
- New Ushio bulb ensures consistent brightness and colour accuracy
Ready-to-install replacement lamp
This Runco 151-1025-00 module ships as a complete 250W bulb and housing assembly so you can swap it straight into a compatible Runco projector. The lamp is new and manufactured to ISO9001 quality checks covering beam performance ignition voltage and run-time.
Build and mounting
The pre-assembled housing eliminates the need to handle a bare bulb or align separate components during installation. A secure connector interface matches the original socket ensuring reliable electrical contact and stable mechanical fit day to day.
2000-hour rated life
The NSH 250W bulb is rated for 2000 hours of operation before brightness drops to half its initial output. Buyers who need longer intervals between replacements should look for a higher-hour module because this lamp does not exceed the 2000-hour specification.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $73.99
- Cheaper than about 74% of the 9,513 comparable items (median $99.99).
- Power rating 250 W
- Higher than about 70% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | Runco |
| Product type | Project Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 250 W |
Questions about this item
Does the 250W lamp draw that full wattage the whole time it runs?
The lamp is rated at 250W, so the projector's power supply will provide that wattage during normal operation.
Will the 151-1025-00 housing fit the same mounting points as the original module?
Yes, the module is a fully assembled bulb and housing built to match the original Runco 151-1025-00 dimensions and mounting points.
What is the correct way to seat the lamp module so the projector recognises it?
Slide the module in until it clicks firmly into the connector, then tighten any retaining screws before closing the lamp door; the most common mistake is leaving the module slightly loose so the interlock switch stays open.
More in Replacement Projector Bulbs
Similar items
GreenTechLLC DT01295 projector lamp 170 W
- 170 W
- 1,500 (Normal) - 3,…
Toshiba TDP-SC35U projector lamp 180W UHP
- 180 W
- 2,000 (Normal) - 3,…
Hitachi, Ltd. CP-X4042 Projector Lamp 215W UHP
- 215 W
- 5,000 (Normal) - 6,…





