We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver stainless-steel 1/4-20 shoulder screw 14mm wide 18.7mm long with 3.9mm hex socket and rubber pad

Ruth's sister

Ruth's sister 1/4-20 lanyard screw 14mm 18.7mm

SKU CH-4PZ9-Z64W2

A 1/4-20 stainless-steel shoulder screw with a 3.9 mm hex socket and anti-skid pad lets you attach a neck strap or lanyard directly to a camera’s tripod socket for quick on-off carrying

  • Quick strap attachment via 1/4-20 tripod thread
  • Anti-slip rubber pad protects camera base finish
  • 9 mm hex socket allows tool-assisted tightening
  • 14 mm diameter x 18.7 mm length fits standard mounts
  • Stainless steel construction resists corrosion in studio or outdoor use

Stainless-Steel 1/4-20 Camera Screw

This 1/4-20 stainless-steel screw replaces the standard tripod socket on DSLR or SLR cameras and adds a built-in lanyard attachment point. The one-piece design includes an anti-skid rubber pad and a 3.9 mm hex socket for secure installation. Photographers can thread an existing neck strap directly through the screw without modifying the strap or the camera body.

Limited to 1/4-20 Tripod Threads

The screw only fits devices that provide a standard 1/4-20 female thread on the base plate. Cameras with proprietary mounting systems, recessed sockets deeper than the 18.7 mm total length, or smaller thread pitches cannot accept this adapter. The 14 mm outer diameter also requires sufficient clearance around the tripod hole so the rubber pad seats flush.

Upgrade from Split-Ring or Loose Strap Loops

The screw replaces separate split rings, quick-release plates or makeshift loops that can twist, scratch the base or come loose during use. The integrated hex socket lets the user tighten the connection firmly, eliminating the play common with hand-tightened strap lugs. The jump is worthwhile when a photographer wants a single, low-profile anchor that stays aligned with the camera base and supports the full weight of the rig.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 70% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the 14 mm diameter fit my camera base plate?

The screw has a 14 mm outer diameter and a standard 1/4-20 thread, matching most DSLR and SLR tripod sockets.

What does the 18.7 mm length mean when installed?

Total length is 18.7 mm, so the screw protrudes that far from the camera base, leaving room for a strap loop or quick-release ring.

Is the 3.9 mm hex socket compatible with my tools?

A 3.9 mm hex key fits the socket, allowing secure tightening without a separate screwdriver slot.

More in Internal PSU & Riser Cables

Similar items