We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 120mm server fan with seven blades and 4-pin connector

Ruth's sister

Ruth's sister 12038 12V 2.7A 120mm 38mm 4PIN internal power cable

SKU CH-YE9F-4JAY5

120 mm 12 V server fan with double ball bearings, 2.7 A current, 1500–2000 rpm and 25 dBA noise

  • 120 mm frame fits standard server and case mounts
  • Double ball bearing rated for 100000 hours of continuous operation
  • 38 CFM airflow at 25 dBA for high-density cooling
  • 4-pin PWM connector enables precise 1500-2000 rpm speed control
  • 12 V 2.7 A power draw supports demanding miner and server workloads

120 mm Server Cooling Fan

This 120 mm fan runs on 12 V and draws 2.7 A through a 4-pin connector. It spins between 1500 and 2000 rpm using high-precision double ball bearings. The frame measures 120 by 120 by 38 mm and is rated for 100000 hours of operation.

Suitable For High-Airflow Server Chassis

Builders who need 210.38 CFM at 21.60 mmH2O static pressure for dense server racks or Bitcoin miner enclosures will match this specification. Buyers who require lower noise than 25 dB-A or a smaller 25 mm thick frame should consider other models.

4-Pin PWM Power Interface

The four-pin connector delivers PWM speed control and tachometer feedback to the motherboard or fan controller. Verify that the header supplies 12 V at 2.7 A before installation.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $29.99
Pricier than about 71% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will the 120mm 38mm 4PIN fan fit alongside my existing 120mm 25mm case fans?

This fan is 38 mm thick versus the common 25 mm, so it needs extra clearance; check your case specs before mounting it next to slimmer fans.

How can I verify the double ball bearing fan is running at the rated 1500-2000 rpm after installation?

Connect the 4PIN header to your motherboard or fan controller, then monitor RPM in BIOS or software; it should read between 1500 and 2000 rpm under load.

Does the package include mounting screws or a 4PIN-to-Molex adapter, or must I buy them separately?

The supplier lists "Package: Yes" but does not detail contents; expect the fan unit only and source screws or adapters separately if your case lacks them.

More in Internal PSU & Riser Cables

Similar items