Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 12-piece set of 18 AWG PCIe 6-pin to 8-pin cables with a breakout board supporting up to 1200 W and dual PSU start
This PCIe breakout board converts a single server power supply into twelve 6-pin to 8-pin connectors for graphics cards. It is built for miners and builders who run multiple GPUs from one high-wattage PSU. A voltmeter LED display shows the 12 V rail voltage at a glance. Dual PSU start-up is supported through a small 4-pin connector.
The board is rated for 750 W and 1200 W operation with up to twelve PCIe cables attached. It runs out of headroom when total GPU draw exceeds the 1200 W limit or when more than twelve cards are required. Compatible server PSUs include models such as DPS-1200FB A, DPS-1200QB A, HSTNS-PL12, HSTNS-PL18 and PS-2751-5Q up to 1600 W capacity.
Twelve 18 AWG power cables ship with the board for immediate installation. The integrated power button lets you cycle the rig without reaching the PSU switch. Mounting uses the existing PSU screw holes, so no extra brackets are needed. Buyers who need more than twelve GPU connections or non-server ATX power supplies cannot use this board.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Yes, the DPS-1200FB A is listed among the supported Common Slot models, so the board's 12 connectors will mate correctly.
The on-board LED voltmeter displays the +12 V rail in real time; a steady reading near 12 V indicates the board is operating as intended.
The package contains the breakout board plus 12 pieces of 6-pin to 8-pin 18AWG power cables; no extra cables are required.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?