We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with 40-pin IDE and 68-pin SCSI connectors

Ruth's sister

Ruth's sister AEC-7722 IDE to 68-pin SCSI adapter card

SKU CH-NHPQ-8EQ7S

Connects an IDE interface to a 68-pin LVD SCSI device using the AEC-7722 bridge adapter card

  • Connects IDE drives to 68-pin SCSI systems
  • Bridges IDE to LVD SCSI protocol
  • Provides storage controller functionality
  • Model 7722 ensures correct adapter identification

IDE to 68-pin SCSI bridge adapter

The AEC-7722 adapter card connects an IDE host interface to a 68-pin LVD SCSI device. It serves technicians and hobbyists maintaining legacy storage arrays or industrial equipment that still rely on parallel SCSI drives. The board provides a direct bridge without additional software layers.

Installation notes and common issues

The card installs in a standard expansion slot and requires only the IDE cable and 68-pin SCSI connector to be seated firmly. Misaligned pins on the high-density SCSI plug are the most frequent cause of detection failures. Terminators must be present on the SCSI bus or the drive will not appear. Verify the target device supports LVD signalling before connecting.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $38.99
Pricier than about 78% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the AEC-7722 bridge adapter is functioning after installation?

Connect a 68-pin LVD SCSI drive to the adapter, power the system and verify the drive appears in the BIOS or operating system device list.

What is included with the AEC-7722 adapter and what extra items are needed?

The adapter card is supplied; you must provide an IDE cable, a 68-pin SCSI cable and a compatible LVD SCSI storage device.

More in Internal PSU & Riser Cables

Similar items