We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic CPU cooling fan assembly with five blades and a four-pin connector, shown loose on a plain background

Ruth's sister

Ruth's sister CPU Fan 750688-001 792852-001 775415-001 DL360 Gen9

SKU CH-7R29-AATRR

A 12 V, 4-pin CPU cooling fan with five blades and variable speed fits the DL360 Gen9 server

  • Cools DL360 Gen9 servers with 12 V 4-pin power
  • Spins 200 to 1500 rpm for variable airflow
  • Five blades move air through the chassis
  • Direct replacement for part numbers 750688-001 792852-001 775415-001
  • Single fan module installs in the CPU slot

DL360 Gen9 CPU Cooling Fan Assembly

This 12 V cooling fan assembly fits the DL360 Gen9 server chassis. It operates at speeds between 200 and 1500 rpm using a 4-pin power interface. The module uses five blades to move air through the system. It replaces part numbers 750688-001, 792852-001 and 775415-001.

Replaces Worn or Failed Original Fan Module

Install this unit when the original factory fan becomes noisy, runs at reduced speed or fails completely. The jump is worth it when server thermal alerts appear or when preventive maintenance schedules call for fan replacement. It restores the designed airflow path for the CPU socket area.

Limited to DL360 Gen9 4-Pin Fan Header

This assembly connects only to the specific 4-pin fan header on the DL360 Gen9 system board. It cannot be adapted to 3-pin headers or standard desktop PWM headers without a separate converter. The fixed blade count and speed range are calibrated for that platform's thermal profile.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $25.99
Pricier than about 68% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does this fan module fit the standard drive-cage mounting points in a DL360 Gen9?

The assembly is built for the DL360 Gen9 chassis and aligns with the factory CPU-fan mounting holes — no adapter bracket is required.

What is the correct way to seat the 4-pin power connector during installation?

Press the 4-pin plug straight onto the motherboard header until the latch clicks; angling the connector bends pins and causes a no-post fault.

When should the fan assembly be swapped out in a DL360 Gen9?

Replace it when bearing noise appears, speed falls below the 200 rpm floor under load, or the iLO logs a fan-fault alert.

More in Internal PSU & Riser Cables

Similar items