We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal power cable with 6.5mm 3-pin connector and 4.0mm barrel plug

Ruth's sister

Ruth's sister internal power cable 6.5*4.4mm 3 pin Fujitsu 16V 3.36A 3.75A 19V 3.16A Sony 19.5V 6.5*4.0 Male

SKU CH-2R87-S013P

Internal power cable with 6.5×4.4 mm three-pin connector for Fujitsu 16 V, 19 V and Sony 19.5 V laptops

  • Compatible with Fujitsu 16V 3.36A adapters
  • Compatible with Fujitsu 19V 3.16A adapters
  • Compatible with Sony 19.5V 6.5*4.0mm connectors
  • 5*4.4mm 3-pin internal power cable

Fujitsu and Sony power cable

This internal power cable connects compatible Fujitsu and Sony devices using a 6.5 mm by 4.4 mm three-pin male connector. It supports Fujitsu units rated at 16 V 3.36 A, 19 V 3.16 A and 3.75 A, as well as Sony units rated at 19.5 V with a 6.5 mm by 4.0 mm plug. The cable is designed for direct internal installation.

Simple plug-in installation

Align the three-pin connector with the device socket and press firmly until seated. The main issue is selecting the wrong tip size; the 4.4 mm and 4.0 mm plugs are not interchangeable. Verify the voltage and current ratings on your hardware label before connecting.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $31.99
Pricier than about 73% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 3-pin 6.5×4.4 mm connector is delivering the correct 16 V 3.36 A to my Fujitsu laptop after installation?

Measure the output voltage at the connector with a multimeter while the system is running; it should read close to 16 V and the laptop should charge without errors.

What comes in the box and do I need a separate power brick for the Sony 19.5 V 6.5×4.0 mm connection?

Only the internal cable is included; you must supply a compatible 19.5 V power adapter with a 6.5×4.0 mm plug for the Sony side.

More in Internal PSU & Riser Cables

Similar items