We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat ribbon cable with multiple connectors on dark background

Ruth's sister

Ruth's sister INVC186 HITAHI UGM-A3 N10128F-8 K3021 0551EV internal power cable

SKU CH-NXX8-F8F4H

Connects high-pressure board INVC186 to 7-10 inch tablet LCD displays

  • High-pressure strip INVC186 for reliable power delivery
  • Compatible with Hitachi UGM-A3 boards for direct replacement
  • Supports 7 to 10 inch tablet LCD displays
  • Part numbers N10128F-8 and K3021 0551EV ensure correct fit

Internal Power Cable for Small Displays

This Ruth's sister cable carries the INVC186 HITAHI UGM-A3 part number and is built for 7 to 10 inch tablet LCD panels. It connects the display's high-pressure board to the host system without extra adapters. Installers working on compact industrial or embedded screens will find the fit direct and the routing simple.

Low-Profile Power Delivery

The thin conductor layout keeps voltage drop minimal across the short runs typical of 7 to 10 inch modules. Heat stays low enough that no active cooling is required in normal operation. The assembly adds negligible acoustic noise and draws only the current the panel demands.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $29.99
Pricier than about 71% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the INVC186 high pressure strip onto the UGM-A3 board without damaging the 551 connector?

Align the N10128F-8 flex cable with the K3021 socket on the 0551EV high pressure board, press evenly along the 186-pin strip until seated, and verify the 10128 marking faces the display side before locking the latch.

When should I replace the INVC186 high pressure strip if the 7-10 inch tablet LCD shows pressure spots?

Replace the strip when persistent bright or dark spots appear along the 186-pin contact area, the 551 connector shows bent pins, or the K3021 board flex exceeds 2 mm during reassembly.

More in Internal PSU & Riser Cables

Similar items