We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black adapter cable with one connector splitting into two

Ruth's sister

Ruth's sister R210 T110 to H700 H200 H310 1-to-2 Adapter Cable

SKU CH-YB42-CPQ5D

Splits a single power connection into two for PowerEdge R210, T110, H200, H310 and H700 systems

  • Splits one power connector into two for H700 H200 H310
  • Fits PowerEdge R210 and T110 systems directly
  • New condition ensures reliable server power delivery
  • Replaces Dell CN-0G96YT part for exact compatibility

Dell PowerEdge adapter cable

This 1-to-2 adapter cable connects a Dell PowerEdge R210 or T110 system to H700, H200 or H310 controllers. It uses part numbers G96YT and 0G96YT for direct replacement. The cable is new and built for internal server power routing.

Server builders needing split power

Technicians servicing compatible PowerEdge models will find the correct pin-out and length. Buyers with different server chassis or controller cards should verify their part numbers before ordering. Those needing single-connector cables or alternative pin layouts must look elsewhere.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 58% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 1-to-2 adapter cable to the PowerEdge R210 or T110 backplane and H700, H200, or H310 controllers?

Plug the single connector into the system-board header on the R210 or T110, then attach the two split ends to the H700, H200, or H310 controller ports; the step often missed is seating both split connectors fully so each controller channel receives power.

When should the G96YT 0G96YT adapter cable be replaced in a CN-0G96YT assembly?

Replace the cable if the insulation shows cracking, the pins are bent, or intermittent power causes the H700, H200, or H310 controller to drop drives during POST on the R210 or T110.

More in Internal PSU & Riser Cables

Similar items