We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small foldable plastic landing gear legs for Mini 3 Pro drone

Ruth's sister

Ruth's sister Upgraded Protector Foldable Landing Gear for Mini 3 Pro Flight Height Legs

SKU CH-85ED-22GW6

Foldable landing gear raises the drone 28-40 mm for stable take-offs and landings on uneven ground

  • Foldable design raises drone 28-40 mm for safer take-offs and landings
  • Lightweight plastic adds no flight burden while improving ground clearance
  • Stable legs allow secure landings on uneven surfaces
  • Quick tool-free installation and removal for field convenience
  • Compact 7 x 7.8 cm footprint stores easily in kit

Foldable Landing Gear for Mini 3 Pro

This foldable landing gear is designed specifically for the Mini 3 Pro drone. It increases the ground clearance by approximately 28-40mm for safer take-offs and landings on uneven surfaces. The lightweight plastic construction adds minimal weight to the aircraft. It suits pilots who want better protection for their drone's underside and camera gimbal.

Compatibility and Use Cases

This accessory suits Mini 3 Pro owners operating from rough terrain, tall grass, or sandy beaches where extra height prevents debris damage. It is not for pilots who require a landing solution for other drone models or those who prioritise the absolute minimum weight for maximum flight time. Builders seeking a permanent fixed landing gear should look at alternative designs.

Height Increase Specification

The gear raises the airframe by roughly 28 to 40 millimetres depending on the deployment angle. This measurement is the critical factor for clearing obstacles during ground contact. The folded dimensions are approximately 7 by 7.8 centimetres for compact storage. Verify that this clearance range matches your typical operating environment before purchasing.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 60% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What are the dimensions of the landing gear so I can confirm it fits my Mini 3 Pro?

Each leg measures approximately 7 by 7.8 centimetres, or 2.76 by 3.07 inches, matching the Mini 3 Pro mounting points.

How do I install the landing gear and what is the common mistake to avoid?

Clip the foldable legs onto the drone arms until they click; the step users miss is unfolding each leg fully so the 28 to 40 millimetre height increase locks in place.

Will the plastic landing gear need replacement after rough landings on uneven ground?

The plastic construction handles uneven surfaces but inspect the clips and legs for cracks after hard impacts; replace any damaged piece to keep the drone stable.

More in Internal PSU & Riser Cables

Similar items