We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with ten 6-pin power connectors and dual PSU sockets

Ruth's sister

Ruth's sister X3650 Dual PSU Breakout Board 10×6pin internal power cable

SKU CH-R45G-2NFTW

Breakout board connects two X3650 PSUs delivering 1350 W through ten 6-pin outputs for S7 a721 and a741 gear

  • Dual X3650 PSU support for 1350W rated output
  • Ten 6-pin connectors power multiple mining devices
  • Compatible with S7 a721 and a741 equipment
  • Lightweight adapter board weighs only 57g
  • High-efficiency parallel power conversion at low cost

Dual PSU Breakout Board for X3650 Server Power

This adapter board connects two X3650 server power supplies to mining or compute hardware. It provides ten 6-pin output interfaces for distributing power to multiple devices. The board is designed for builders using X3650 PSUs who need a simple parallel power solution. It suits setups such as S7, a721 and a741 equipment requiring high current delivery.

Thermals and Power Draw in Normal Use

The board supports a combined rated output of 1350W when two X3650 power supplies are used, equivalent to 1500W wall input. High efficiency keeps waste heat low across the ten 6-pin connectors. Passive operation means no fan noise is added to the system. The lightweight PCB at 57g adds minimal thermal mass inside the chassis.

What This Replaces and When the Jump Is Worth It

The adapter replaces custom wiring or multiple separate breakout cables when running dual X3650 units. It is worth adopting when a single board with ten 6-pin outputs simplifies cable routing for dense mining rigs or GPU clusters. Builders needing fewer than ten connectors or using a different PSU form factor will not benefit from this specific board.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $14.99
Typical for this category: the median of 7,839 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the X3650 dual PSU breakout board and connect the 10 6pin cables without misaligning the power supplies?

Mount the adapter board, plug both X3650 units into their dedicated sockets, then attach each of the 10 6pin leads to the target devices; the step often missed is powering both supplies simultaneously so the parallel scheme balances correctly.

What maintenance or replacement will the X3650 breakout board and its 6pin connectors need over time?

The 57 g board itself has no moving parts; inspect the 10 6pin connectors periodically for dust or bent pins and replace any cable showing discoloration or loose crimps to keep the 1350 W path reliable.

What limit appears first when running the dual X3650 setup at continuous 1350 W load?

The combined 1350 W rated ceiling (equal to 1500 W wall input) is the first hard limit; exceeding it trips the supply protection before any thermal or connector bottleneck on the board.

More in Internal PSU & Riser Cables

Similar items