We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 90-degree rotary elbow fitting with male and female G 1/4 threads

PrimoChill

PrimoChill Male to Female G 1/4in 90 Degree SX Rotary Elbow Fitting diy cooling

SKU CH-7Y3M-HW67Q

A 90-degree rotary elbow fitting with male and female G 1/4 threads redirects water-cooling loops in tight spaces

  • Product typeCPU Block

Model UV Red

Show 3 more
  • Rotary joint lets you aim tubing 90 degrees from the mount
  • 90-degree elbow redirects loop away from components at unconventional angles
  • Male G 1/4 and female G 1/4 threads connect standard water-cooling parts
  • Coated brass construction resists corrosion in custom loops
  • 20-year US brand focused on DIY cooling reliability

Loop redirection fitting

The PrimoChill Male to Female G 1/4in 90 Degree SX Rotary Elbow Fitting lets custom-loop builders change tubing direction sharply without kinking. Coated brass construction handles coolant flow while the rotary joint lets you aim the outlet precisely. It suits anyone assembling a water-cooling circuit who needs a tight 90-degree turn at a component or radiator port.

G 1/4 BSPP thread compatibility

This fitting mates a male G 1/4 thread on one side with a female G 1/4 thread on the other, the standard pitch for most water-blocks, radiators and reservoirs. Verify that every port you plan to connect uses the same G 1/4 BSPP specification; mismatched threads will not seal. No other thread standard is supported by this part.

Hand-tight installation with leak check

Screw the male end into the component port by hand, then rotate the elbow to the desired angle before final snugging. The joint can occasionally shift after movement, so pressure-test the loop and re-seat the rotary seal if any weep appears. An O-ring is pre-installed on the male thread; keep the spare in case of re-assembly.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 63% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeCPU Block

Other versions of this model

5 more in the same range

Questions about this item

How does the 90-degree rotary elbow change the tubing path inside a case?

The fitting redirects the run by a right angle and the rotary joint lets you orient the outlet in any direction around that axis, so tubing can clear nearby components without sharp bends.

What does the G 1/4 thread specification mean for compatibility with other water-cooling parts?

Both ends use the standard G 1/4 parallel thread found on most blocks, radiators, reservoirs and pumps, so the elbow screws directly into any component or fitting with a matching G 1/4 port.

What clearance is needed to install the coated-brass rotary elbow?

The 90-degree body extends roughly one fitting length from the port, and the rotary section adds a small radial profile; allow enough space around the male thread for the elbow to sit flush and the joint to rotate freely.

More in Heatsinks & Water Blocks

Similar items