We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 14-gauge 2-conductor speaker wire on spool, 50 ft

sakose

sakose SPW142-50I 50 ft 14/2 speaker wire

SKU CH-3ZZR-25NWN MPN SPW142-50I

50 ft 14-gauge two-conductor speaker wire UL listed and CL2 rated for in-wall installation

  • Connector count2
  • Product typeSpeaker Wires
  • Product colorWhite
  • Details14 gauge inside wall with 2 conductors
  • Key featuresBytecc speaker wires are UL listed and CL2 rated for in wall
  • Overall length50 ft (15.2 m)
  • Safe in-wall installation with UL and CL2 rating
  • Easy polarity identification via red and black conductors
  • 50 ft length suits medium room runs
  • 14 gauge two-conductor design handles typical speaker loads
  • White jacket blends with ceilings and walls

50 ft 14/2 in-wall speaker cable

This 50-foot speaker wire uses 14-gauge copper with two conductors inside a white CL2-rated jacket. It is built for in-wall runs in home audio systems and carries UL listing for safety compliance. The red and black conductors simplify polarity identification during installation.

Capacity and headroom for whole-room runs

The 14-gauge cross-section keeps resistance low across the full 50-foot length, supporting typical stereo or surround speakers at normal listening levels. Longer pulls or very high-power amplifiers would need thicker gauge to avoid signal loss. The two-conductor design serves a single speaker pair only.

Upgrade from thin factory zip cord

Replaces the thin gauge wire often bundled with entry-level speakers or used in temporary setups. The CL2 rating makes the jump worthwhile whenever cable must pass through walls or ceilings to meet building code. It is not suited for installations needing more than two conductors or outdoor burial.

How it compares

Measured against everything we stock in Speaker Wire & Speaker Cables, at today’s prices. Recalculated every night.

Price $35.99
Typical for this category: the median of 295 items is $38.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameBYTECC
Model nameSPW142-50I
Product typeSpeaker Wires
Product colorWhite
Ports & slots
Connector count2
Size & build
Overall length50 ft (15.2 m)

Questions about this item

Will the 14 gauge, 2 conductor cable work with my existing 8 ohm speakers and older amplifier?

The 14 gauge wire with two conductors is suitable for typical 8 ohm speaker runs up to 50 ft and connects to standard amplifier binding posts or spring clips.

How can I verify the CL2 rating is genuine after pulling the cable through the wall?

The white outer jacket carries the UL and CL2 markings printed at regular intervals; inspect the jacket after installation to confirm the rating is present.

Does the 50 ft spool include banana plugs or connectors, or must I buy them separately?

The package contains only the raw 14/2 cable with red and black conductors; any banana plugs, spades or wall plates must be purchased separately.

More in Speaker Wire & Speaker Cables

Similar items