sakose VGA-10 10 ft VGA Male to Male Cable with Ferrites
A 10 ft black VGA male-to-male cable with dual ferrites and double shielding for monitor connections
- Connector count2
- Connector detailsVGA to VGA
- Connector genderMale to Male
- Cable length10 ft (3.05 m)
- Product typeVGA
- Product colorBlack
Cable Length 10 Feet
- 6 Feet$9.99
- 10 Feet$10.99
- 15 Feet$15.99
- 25 Feet$13.99
- 50 Feet$27.99
- Reduced interference with dual ferrite cores and double shielding
- Reliable signal over distance using 3 coaxial and 4.5 twisted-pair conductors
- Secure fit from male-to-male VGA connectors on both ends
- Standard 10 ft length suits typical monitor-to-PC setups
- Built to UL 2919 spec with 28 AWG low-voltage computer cable
VGA Male-to-Male Cable 10 ft
This 10 ft VGA cable connects a computer or laptop to a monitor, projector or KVM switch with a standard 15-pin VGA port. The male-to-male design suits home offices, classrooms and meeting rooms where legacy analogue video is still used.
Dual Ferrite Double Shielding
Two moulded ferrite cores and a braid-plus-foil shield suppress EMI and RFI along the full length. The construction meets UL 2919 with three coaxial and 4.5 twisted-pair conductors in 28 AWG.
10 ft Analogue Video Reach
The 10 ft length covers typical desk-to-display runs without signal boosters. Longer analogue links may need active extenders, and digital-only ports such as HDMI or DisplayPort require a separate adapter.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Typical for this category: the median of 1,119 items is $10.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BYTECC |
| Model name | VGA-10 |
| Product type | VGA |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Connector details | VGA to VGA |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Cable length | 10 ft (3.05 m) |
Other versions of this model
4 more in the same range
sakose VGA-15 15 ft VGA male to male cable with dual ferrites
- VGA
- Black
sakose VGA-50 50 ft VGA Male to Male Cable with Dual Ferrites
- VGA
- Black
Questions about this item
What does the 10 ft length mean for monitor placement?
The cable spans 10 ft between a PC and a monitor, giving enough slack for desk routing without excessive coil.
How does the VGA interface limit the signal?
VGA carries analogue video only, so maximum resolution and refresh rate depend on the graphics card and monitor rather than the cable itself.
What do the dual ferrites and double shielding add to the installation?
Dual ferrites and braid-plus-foil shielding suppress EMI, allowing the 28 AWG conductors to meet UL 2919 over the full 10 ft run.
More in VGA Monitor Cables
Similar items
Nippon Labs SVGA-15 15 ft SVGA Male to Male cable
- Male to Male
- SVGA
AAAwave PCIe 6-pin to dual 6+2-pin braided splitter cable 23 cm pack of 2
Nippon Labs SVGA-10 10 ft SVGA Male to Male cable
- Male to Male
- SVGA
Nippon Labs SVGA-25 25 ft SVGA Male to Male cable
- Male to Male
- SVGA









