SAMSUNG 970 EVO MZ-V7E500E 500GB internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 NVMe SSD with 2TB capacity, sequential read up to 3500 MBps and write up to 2500 MBps
Capacity 2TB
The Samsung 970 EVO MZ-V7E2T0E is a 2TB internal solid state drive built for consumer PCs. It uses the M.2 2280 form factor and connects through a PCIe Gen 3.0 x4 interface with NVMe 1.3 protocol. Samsung V-NAND 3-bit MLC memory and a Phoenix controller deliver sequential reads up to 3500 MBps and writes up to 2500 MBps.
This drive suits users upgrading a system with a PCIe Gen 3.0 x4 M.2 slot who want high endurance and strong random performance of 500,000 read IOPS and 480,000 write IOPS at QD32. Buyers building a new platform that wires the M.2 slot directly to a PCIe 4.0 or 5.0 CPU should look at a Gen 4 or Gen 5 drive to use the full bandwidth of that platform.
The single specification that decides fit is the maximum sequential read speed of 3500 MBps, which marks the ceiling of the PCIe Gen 3.0 x4 interface. If your workload needs sustained throughput above that figure, this drive will bottleneck the task; if 3500 MBps meets your target, the 2TB capacity and 1,500,000-hour MTBF give ample space and reliability.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Product line | 970 EVO |
| Model name | MZ-V7E2T0E |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,500 MB/s |
| Sequential write speed | Up to 2,500 MB/s |
| Random read (4K) | QD32: Up to 500,000 IOPS QD1: Up to 15,000 IOPS |
| Random write (4K) | QD32: Up to 480,000 IOPS QD1: Up to 50,000 IOPS |
| Storage | |
| NAND flash type | V-NAND 3-bit MLC |
| Controller chip | Samsung Phoenix |
| Cache memory | 2 GB Low Power DDR4 SDRAM |
| Ports & slots | |
| Interface type | PCIe Gen 3.0 x4, NVMe 1.3 |
| Power | |
| Idle power draw | 30 mW (max) |
| Active power draw | Average: 6 W / Maximum: 10 W (Burst mode) |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 2.38 mm |
| Overall width | 22.15 mm |
| Product depth | 80.15 mm |
| Product weight | 8g |
| Shipping weight | 0.08 kg |
| Package size | 141 × 98 × 24 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1,500G & 0.5 ms (Half sine) |
| More details | |
| Mean time between failures | 1,500,000 h |
Other versions of this model
The drive uses the M.2 2280 form factor and requires an M.2 slot keyed for PCIe NVMe; check your device manual for slot length and keying compatibility.
It is designed for PCIe Gen 3.0 x4 and NVMe 1.3; the slot must provide four lanes to achieve the quoted sequential read and write figures.
Active power averages 6W with a maximum burst of 10W, while idle power is a maximum of 30 mW, so a standard M.2 power rail is sufficient.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?