XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA enterprise SSD delivering 1.92 TB capacity with 550 MB/s sequential read, 520 MB/s write, 98 KIOPS random read, 28 KIOPS random write, and AES 256-bit encryption
The Samsung PM883 is a 2.5-inch enterprise solid-state drive built for data-centre workloads that demand reliable high capacity. It uses 3D NAND technology and a SATA interface to deliver consistent performance for read-intensive applications.
The drive sustains sequential reads of 550 MB/s and writes of 520 MB/s, with random read performance up to 98 KIOPS and random write up to 28 KIOPS. Read latency is 140 us and write latency is 40 us, while the AES 256-bit encryption engine secures data at rest.
The 7mm high 2.5-inch form factor fits standard drive bays and uses the common SATA data and power connectors. Ensure the host system supports SATA 3.3 and NCQ with 32-depth command queues; mismatched cabling or an older controller can limit throughput or prevent the drive from being detected.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
| Product line | PM883 |
| Model name | MZ7LH1T9HMLT |
| Part number | MZ-7LH1T90 |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 520 MB/s |
| Sustained sequential read rate | 550 MB/s |
| Sustained sequential write rate | 520 MB/s |
| Random read (4K) | Up to 98 KIOPS |
| Random write (4K) | Up to 28 KIOPS |
| Read latency | 140 us |
| Write latency | 40 us |
| Storage | |
| NAND flash type | 3D NAND |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 1.3 W |
| Active power draw | Read: 2.3 W, Write: 3.6 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 100.2 mm |
| Product depth | 69.85 mm |
| Product weight | Up to 58 g |
| Shipping weight | 0.06 kg |
| Package size | 203 × 140 × 44 mm |
In a real machine the PM883 delivers sustained reads up to 550 MB/s over SATA III, so large files and boot images load at the interface ceiling without stalling.
The SATA III link caps throughput at 6 Gb/s, so the drive tops out at 550 MB/s read and 520 MB/s write even though the 3D NAND could go faster on a wider bus.
It fits any standard 2.5-inch bay with 7 mm height, 100.2 mm width and 69.85 mm depth, using the usual SATA power and data connectors.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?