SanDisk Optimus GX 7100 500GB M.2 2280-S3-M PCIe 4.0 x4 NVMe internal SSD SDSP71500GAN-000E0
- 500 GB
- M.2 2280-S3-M
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4 TB M.2 2280-S3-M internal SSD with PCI-Express 4.0 x4 interface, NVMe 2.0 protocol, up to 7000 MBps sequential read, 6700 MBps sequential write, 900000 IOPS random read.
Capacity 4TB
The SanDisk Optimus GX 7100 is a 4TB internal SSD built to the M.2 2280-S3-M form factor. It connects over a PCI-Express 4.0 x4 link using the NVMe 2.0 protocol. The drive uses 3D NAND TLC memory and ships without a heatsink.
This drive fits desktops and laptops that have an M.2 2280 slot wired for PCIe 4.0 x4 and can accommodate a single-sided module. Systems limited to PCIe 3.0 or shorter M.2 keys will not reach the stated speeds. Builds that require a factory-fitted heatsink should consider other models.
Verify the motherboard or laptop provides an M.2 2280-S3-M socket with PCIe 4.0 x4 electrical wiring. Confirm the operating temperature range of 0 to 85 °C matches the chassis airflow. Ensure the firmware supports NVMe 2.0 features before installation.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SanDisk |
| Product line | Optimus GX 7100 |
| Model name | SDSP71400TAN-000E0 |
| Total capacity | 4 TB |
| Product type | Internal Solid State Drive (SSD) |
| Performance | |
| Sequential read speed | Up to 7,000 MB/s |
| Sequential write speed | Up to 6,700 MB/s |
| Random read (4K) | Up to 900,000 IOPS |
| Random write (4K) | Up to 1,350,000 IOPS |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Write endurance | 2400 TB |
| Connectivity | |
| Connection protocol | NVMe 2.0 |
| Ports & slots | |
| Interface type | PCI-Express 4.0 x4 |
| Power | |
| Idle power draw | 5 mW |
| Active power draw | Average Active Power Read: 4.1 W Average Active Power Write: 4.0 W |
| Size & build | |
| Form factor | M.2 2280-S3-M |
| Heat sink | Without HeatSink |
| Overall height | 2.38 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 5.8g |
| Shipping weight | 0.05 kg |
| Package size | 127 × 102 × 22 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 85 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1,500G @ 0.5 ms half-sine |
| Vibration tolerance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| More details | |
| Mean time between failures | 1,750,000 h |
Other versions of this model
The drive uses the M.2 2280-S3-M form factor, so the slot must accept 80 mm modules with an M-key connector.
It is a PCIe 4.0 x4 NVMe 2.0 drive; in a 3.0 slot it will operate at PCIe 3.0 speeds instead of the rated 7000 MBps read and 6700 MBps write.
Run a 4 KB random read/write test and look for results near 900,000 IOPS read and 1,350,000 IOPS write.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?