SanDisk WDS240G3G0A-00BJG0 2.5" 240GB SATA internal SSD
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB SATA internal SSD with 3D NAND TLC, SLC caching, 545 MB/s reads and ultra-low power draw for longer laptop use
Capacity 1TB
The SanDisk WDS100T3G0A-00BJG0 is a 1 TB internal solid-state drive built for consumer laptops and desktops. It uses 3D NAND TLC memory and a SATA III interface. The 2.5-inch form factor measures 7.00 mm in height.
The drive connects through a standard SATA III 6 Gb/s link and delivers maximum sequential read speeds up to 545 MBps. SLC caching boosts write performance for everyday tasks. MTTF is rated up to 515K hours.
Ultra-low power draw averages 80 mW active and drops to 30 mW slumber or 15 mW DEVSLP idle, extending battery life in portables. Shock resistance reaches 1,500G and vibration tolerance is 5.0 gRMS operating. The WD SSD Dashboard software monitors drive health.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Western Digital |
| Product line | Green |
| Model name | WDS100T3G0A |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 545 MB/s |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Connectivity | |
| Connection protocol | SATA |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 30 mW Slumber 15 mW DEVSLP |
| Active power draw | 80 mW Avg. 2800 mW Max Read 2800 mW Max Write |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100.5 mm |
| Product weight | 32.7g |
| Shipping weight | 0.07 kg |
| Package size | 127 × 102 × 19 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -55 °C to 85 °C |
| Max shock tolerance | 1,500G @ 0.5 msec half sine |
| Vibration tolerance | Operating: 5.0 gRMS, 10-2000 Hz Non-operating: 4.9 gRMS, 7-800 Hz |
| More details | |
| Mean time to failure | Up to 515K hours |
Other versions of this model
Sequential reads can hit 545 MB/s on a SATA III link; real-world speeds depend on the host controller, cable quality and file sizes.
The SATA III bus caps transfer rates at 6 Gb/s, so even if the controller is faster the drive cannot exceed roughly 545 MB/s sequential.
Yes, the drive is a standard 2.5 inch form factor with a 7 mm z-height, matching most laptop and desktop drive bays.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?