SanDisk WDS250G1R0C Red SN700 NVMe 250GB internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An M.2 2280 NVMe SSD with 500GB capacity, 3430 MBps read and 2600 MBps write speeds for NAS workloads
Capacity 500GB
The SanDisk WD Red SN700 is a 500GB internal solid-state drive built for network-attached storage. It uses an M.2 2280 form factor and connects through a PCI-Express 3.0 x4 interface. The drive targets small-business and enthusiast NAS appliances that need fast caching tiers.
This SSD suits environments running virtualization, collaborative editing or heavy multi-user file access where high random I/O matters. It is less appropriate for a single-user desktop boot drive where sustained write endurance and NAS-specific firmware validation are not required.
Installation requires an M.2 2280 slot wired for PCIe 3.0 x4 and operates between 0°C and 70°C. Idle power draw is 70 mW. The compact stick layout frees traditional 2.5-inch drive bays for additional mechanical storage capacity.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Western Digital |
| Product line | Red SN700 NVMe |
| Model name | WDS500G1R0C |
| Total capacity | 500 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,430 MB/s |
| Sequential write speed | Up to 2,600 MB/s |
| Random read (4K) | Up to 420,000 IOPS |
| Random write (4K) | Up to 380,000 IOPS |
| Storage | |
| Write endurance | 1000 TB |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Power | |
| Idle power draw | 70 mW |
| Size & build | |
| Form factor | M.2 2280 |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 7.5g |
| Shipping weight | 0.05 kg |
| Package size | 127 × 102 × 20 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -55 °C to 85 °C |
| More details | |
| Mean time to failure | 1,750,000 h |
Other versions of this model
The drive uses an M.2 2280 form factor with a PCI-Express 3.0 x4 interface, so the slot must support that key and generation.
Yes, it is purpose-built and tested for popular NAS systems and delivers higher I/O performance than SATA SSDs.
Run a sequential read/write benchmark such as CrystalDiskMark and check that results approach 3430 MBps read and 2600 MBps write.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?