XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5-inch SATA internal SSD with 240GB of MLC NAND storage, delivering up to 530 MB/s read and 440 MB/s write speeds for faster boot and application load times
The Seagate 600 Series ST240HM000 is a 2.5-inch internal solid state drive with a 240GB capacity. It connects through a SATA III interface and uses 19nm MLC NAND flash memory. Sequential reads reach up to 530 MB/s and writes up to 440 MB/s. Random 4KB performance is rated at 80,000 read IOPS and 70,000 write IOPS.
This drive fits 2.5-inch SATA bays in laptops and desktops where a 240GB MLC SSD is required. The 7mm height matches standard drive caddies. Systems that need an M.2 form factor or a different capacity should consider other models.
The SATA III 6Gb/s host interface delivers up to 530 MB/s sequential read speed. This single specification determines whether the drive meets the throughput needs of the target system.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | 600 Series |
| Model name | ST240HM000 |
| Total capacity | 240 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 530 MB/s |
| Sequential write speed | Up to 440 MB/s |
| Random read (4K) | Up to 80,000 IOPS |
| Random write (4K) | Up to 70,000 IOPS |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 70.1 mm |
| Product depth | 100.45 mm |
| Product weight | 77g |
| Shipping weight | 0.02 kg |
| Package size | 109 × 85 × 10 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Operating humidity range | 5% to 95% RH |
| Max shock tolerance | 1500G |
The 530 MB/s read speed lets the operating system and large files load noticeably quicker than a mechanical drive, cutting boot and application launch times in typical use.
The SATA III link caps maximum throughput at 6 Gb/s, so sustained transfers cannot exceed the drive's rated 530 MB/s read and 440 MB/s write even if the controller could go faster.
Yes, the 7.00 mm profile matches the common 2.5 inch laptop bay, and the 70.1 mm by 100.45 mm footprint aligns with standard mounting points.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?