Seagate BarraCuda 510 ZP500CM3A001 500GB M.2 2280 PCIe NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An M.2 2280 internal SSD with 250GB of 3D TLC storage, PCIe Gen3 x4 NVMe 1.3 interface, and sequential speeds up to 3100/1200 MB/s
Capacity 250GB
The Seagate BarraCuda 510 ZP250CM3A001 is a 250GB internal SSD built on 3D TLC NAND with a PCIe G3 x4, NVMe 1.3 interface in the M.2 2280 form factor. It delivers sequential reads up to 3100 MBps and writes up to 1200 MBps for everyday consumer workloads.
Moving from a slower PCIe Gen3 drive or a lower-capacity NVMe module brings immediate gains in random read and write IOPS of 210,000 and 280,000. The 250GB capacity suits OS and application installs where space is limited.
The single-sided M.2 2280 design fits ultra-thin laptops, mini PCs and desktops with tight clearance. Active power of 3.0W and idle draw of 16 mW help battery life. Users needing more than 250GB should consider the 1TB variant in the same series.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | BarraCuda 510 |
| Model name | ZP250CM3A001 |
| Total capacity | 250 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,100 MB/s |
| Sequential write speed | Up to 1,200 MB/s |
| Random read (4K) | Up to 210,000 IOPS |
| Random write (4K) | Up to 280,000 IOPS |
| Storage | |
| NAND flash type | 3D TLC |
| Ports & slots | |
| Interface type | PCIe G3 x4, NVMe 1.3 |
| Power | |
| Idle power draw | 16 mW |
| Active power draw | 3.0 W |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 2.23 mm |
| Overall width | 22.15 mm |
| Product depth | 80.15 mm |
| Product weight | 8.7g |
| Shipping weight | 0.06 kg |
| Package size | 135 × 112 × 28 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,800,000 h |
Other versions of this model
Yes, the single-sided M.2 2280 design fits ultra-thin laptops, mini PCs and desktops that accept a 2280-length module.
Install the drive into the M.2 slot, secure it with the motherboard screw, then ensure the BIOS boot mode is set to UEFI so the NVMe 1.3 drive is detected.
The drive carries a 1,800,000-hour MTBF rating, indicating high endurance for everyday consumer use.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?