XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5-inch 480GB SATA internal SSD with 3D QLC NAND delivering up to 550 MBps read and 500 MBps write speeds for faster system responsiveness
This 2.5-inch internal solid-state drive delivers 480GB of storage using 3D QLC NAND and a SATA III interface. It is built for everyday consumer workloads such as boot drives, application storage and laptop upgrades.
Sequential read speeds reach up to 550 MBps and sequential write speeds up to 500 MBps. Active power draw is rated at 2W with an idle figure of 22 mW, and the drive operates reliably from 0°C to 70°C.
Verify your system has a free 2.5-inch drive bay and a SATA data and power connection. The drive is 7.10mm high and 70.10mm wide, so confirm clearance in slim laptops or small-form-factor chassis before ordering.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | BarraCuda Q1 |
| Model name | ZA480CV1A001 |
| Total capacity | 480 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Storage | |
| NAND flash type | 3D QLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 22 mW |
| Active power draw | 2 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7.1 mm |
| Overall width | 70.1 mm |
| Product depth | 100.4 mm |
| Product weight | 40g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,800,000 h |
The drive consumes 22 mW while idle and up to 2 W during active workloads, keeping heat low for continuous use.
It requires a standard SATA III port and matching power connector on the motherboard or laptop drive bay.
Yes, its 7.10 mm height matches the common 2.5 inch SATA form factor used by most legacy notebooks and desktops.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?