Seagate BarraCuda Q5 ZP1000CV3A001 1TB M.2 2280 PCIe Gen3 x4 NVMe internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 500 GB M.2 2280 internal SSD using PCIe Gen3 x4 NVMe 1.3 with 3D QLC NAND delivering up to 2300 MB/s sequential read and 900 MB/s write
The Seagate BarraCuda Q5 ZP500CV3A001 is a 500GB internal SSD built for consumer PCs and laptops. It uses 3D QLC NAND and a PCIe Gen3 x4 NVMe 1.3 interface to deliver solid-state speed in a compact M.2 2280 form factor. The drive targets users who want faster boot and load times without the cost of higher-end flash.
Installation requires an M.2 2280 key-M slot wired for PCIe NVMe; the drive is 2.15mm thick and 22.00mm wide. Its low 23mW idle draw and 2.2W active power help preserve laptop battery life. The slim profile leaves room for other components and simplifies upgrades in space-constrained chassis.
Sequential reads reach up to 2300 MBps and writes up to 900 MBps during prolonged transfers. The controller manages 3D QLC write amplification to keep performance consistent rather than peaking only in short bursts. A 1.8 million-hour MTBF and 119TB total bytes written rating back long-term reliability at operating temperatures from 0°C to 70°C.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | BarraCuda Q5 |
| Model name | ZP500CV3A001 |
| Total capacity | 500 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 2,300 MB/s |
| Sequential write speed | Up to 900 MB/s |
| Storage | |
| NAND flash type | 3D QLC |
| Ports & slots | |
| Interface type | PCIe Gen3 x4 NVMe 1.3 |
| Power | |
| Idle power draw | 23 mW |
| Active power draw | 2.2 W |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 2.15 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 7g |
| Shipping weight | 0.05 kg |
| Package size | 178 × 133 × 13 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,800,000 h |
Other versions of this model
The drive maintains up to 900 MBps sequential write until the SLC cache fills, after which the 3D QLC NAND settles to its native programme speed; the rated 119 TBW reflects this behaviour.
Active power is 2.2 W and idle power 23 mW; the controller is rated for continuous operation between 0 °C and 70 °C.
A PCIe Gen3 x4 M.2 key-M slot with NVMe 1.3 support is needed; the drive is 22 mm wide and 2.15 mm thick.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?