XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 internal SSD with built-in heatsink delivers up to 7400 MBps read and 6900 MBps write for gaming and content creation
This PCIe Gen4 internal solid-state drive combines 3D NAND TLC memory with a built-in heatsink in the M.2 2280 form factor. It targets enthusiast gamers and content creators who need sustained high throughput for large assets and fast level loading.
The drive suits PlayStation 5 owners adding storage and desktop builders with an M.2 slot that supports PCIe 4.0 x4. Systems limited to PCIe 3.0 will not reach the advertised sequential speeds, and laptops without clearance for a heatsink should choose a single-sided module instead.
Rated maximum sequential read of 7400 MBps and write of 6900 MBps, with 1,300,000 IOPS random read and write, defines the performance ceiling for this model. Endurance is specified at 2400 TBW and MTBF at 1,800,000 hours, while active power draw reaches 8.6 W within a 0 °C to 70 °C operating range.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | FireCuda 530R |
| Model name | ZP2000GM3A073 |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 7,400 MB/s |
| Sequential write speed | Up to 6,900 MB/s |
| Random read (4K) | Up to 1,300,000 IOPS |
| Random write (4K) | Up to 1,300,000 IOPS |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Write endurance | 2400 TB |
| Ports & slots | |
| Interface type | PCI-Express 4.0 x4 |
| Power | |
| Idle power draw | 28mW |
| Active power draw | 8.6 W |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | With HeatSink |
| Overall height | 11.1 mm |
| Overall width | 24.22 mm |
| Product depth | 80.15 mm |
| Product weight | 49g |
| Shipping weight | 0.07 kg |
| Package size | 152 × 102 × 25 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,800,000 h |
The drive uses the standard M.2 2280 dimensions. The integrated heatsink adds height, so verify your device allows a double-sided module with a thermal solution before fitting.
Use the motherboard's M.2 standoff at the 80 mm mark and the supplied M2×3 mm screw; longer screws can damage the controller side of the board.
Check pad contact if sustained writes push temperatures toward 70 °C; replace pads only if they have compressed permanently or torn during a drive swap.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?