XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1TB M.2 2280 internal SSD with PCI-Express 5.0 x4 interface delivering up to 9500 MBps read and 8500 MBps write speeds for demanding gaming and creative workloads
The Seagate FireCuda 540 is a 1TB internal solid-state drive built on the PCI-Express 5.0 x4 interface with NVME protocol. It uses 3D TLC memory to deliver sequential reads up to 9500 MBps and writes up to 8500 MBps. The drive targets enthusiasts and content creators who need high throughput for large project files and modern DirectStorage-enabled titles.
Without a heatsink the drive relies on motherboard cooling to manage thermals during sustained workloads. Active power draw is rated at 10W while idle consumption sits at 144 mW. The M.2 2280 form factor produces no audible noise because it has no moving parts.
The package includes three years of Rescue Data Recovery Services and a five-year limited warranty. These services provide a path to professional recovery if the drive fails and extend the standard coverage period. No additional software utilities or mounting hardware are mentioned in the specifications.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | FireCuda 540 |
| Model name | ZP1000GM3A004 |
| Part number | ZP1000GM3A004 |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 9,500 MB/s |
| Sequential write speed | Up to 8,500 MB/s |
| Random read (4K) | Up to 1,300,000 IOPS |
| Random write (4K) | Up to 1,500,000 IOPS |
| Storage | |
| NAND flash type | 3D TLC |
| Connectivity | |
| Connection protocol | NVMe 2.0 |
| Ports & slots | |
| Interface type | PCI-Express 5.0 x4 |
| Power | |
| Idle power draw | 144(mW) |
| Active power draw | 10 W |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Shipping weight | 0.06 kg |
| Package size | 155 × 108 × 24 mm |
| More details | |
| Mean time between failures | 1,800,000 h |
Insert the M.2 2280 module into a PCI-Express 5.0 x4 slot at a 30-degree angle, secure it with the motherboard screw, then enable NVMe 2.0 in BIOS; the step most people miss is checking that the slot runs at Gen 5 speed rather than falling back to Gen 4.
No scheduled maintenance is required; monitor health via SMART tools and replace the drive if the media‑wear indicator approaches 100 % or if the MTBF rating of 1800000 hours is exceeded in critical workloads.
The controller will throttle once the NAND temperature rises under continuous 8500 MBps writes, reducing sequential throughput to protect the 3D TLC memory and keep power draw near the 10 W active rating.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?