Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4TB 7200 RPM SATA hard drive built for 24×7 NAS arrays, featuring AgileArray RAID optimisation, RV sensors, 128MB cache and a 300TB yearly workload rating
The Seagate IronWolf Pro ST4000NE0025 is a 4TB 3.5-inch internal hard drive built for network-attached storage. It spins at 7200 RPM with a 128MB cache and connects via a SATA 6.0Gb/s interface. AgileArray firmware adds dual-plane balancing and RAID optimisation for multi-bay enclosures.
This drive targets RAID and multi-bay NAS deployments that run continuously. Rotational vibration sensors and a 300TB per year workload rating support heavy write cycles. IronWolf Health Management monitors drive status. Builders needing a different physical interface or smaller form factor should select another class of storage.
The published workload rate of 300TB per year is the key figure for deciding whether this drive matches the write intensity of the planned NAS workload. A 1.2M hour MTBF and the bundled two-year Rescue Data Recovery service back the endurance claim.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | IronWolf Pro |
| Model name | ST4000NE0025 |
| Total capacity | 4 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 128 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.85 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.68 kg |
| Package size | 152 × 119 × 36 mm |
Mount the drive using the 146.99mm length and 101.85mm width screw points, connect the SATA 6.0Gb/s data and power cables, then enable AgileArray in the NAS firmware for dual-plane balancing and RAID optimisation.
The drive is rated for a 300TB per year workload and 1.2M hours MTBF; plan replacement when SMART attributes approach threshold or after five years of continuous 24x7 operation.
The 300TB annual workload rating is the first constraint; sustained writes beyond that rate can reduce the 1.2M hour MTBF and trigger earlier replacement.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?