Seagate XP1920SE70035 Nytro 5350M 1.92TB enterprise SSD

Enterprise NVMe SSD for data centres

The Seagate Nytro 5350M is a 1.92TB internal solid-state drive built on a PCI-Express 4.0 interface with NVMe protocol. It uses 3D eTLC memory in a 2.5-inch 15mm form factor and delivers up to 7400 MBps sequential read and 3300 MBps sequential write speeds. Random read performance reaches 1,250,000 IOPS while random write hits 90,000 IOPS, with a rated endurance of 3500TB written.

Suited for read-heavy enterprise workloads

This drive targets servers and storage arrays that need high throughput and low latency for read-intensive applications. Its 1 drive writes per day endurance rating and 2,500,000 hour MTBF support continuous operation in 0 to 70°C environments. Buyers who need higher write endurance for mixed or write-heavy workloads should look at drives with a greater DWPD rating.

PCIe 4.0 x4 NVMe interface

The single specification that decides compatibility is the PCI-Express 4.0 NVMe connection. The host system must provide a compatible PCIe slot or backplane supporting this interface and the 2.5-inch 15mm physical dimensions. Power draw reaches 14W active average and 6W idle on the 12V rail, requiring adequate cooling within the chassis.