Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 700 mm white 12V-2x6 cable with a 90° L-type GPU connector delivers up to 600 W using 16 AWG wires and HCS terminals rated for 50 mating cycles
This cable connects a 12V-2x6 port on the power supply directly to a 12V-2x6 port on the graphics card. It is built for builders who need a native, single-cable run without adapters or daisy-chained pigtails. The white 700 mm length suits mid-tower and larger cases with routed cable channels.
The assembly is rated for a maximum of 600 W across the 16-pin interface using 16 AWG conductors and High-Current System terminals. A power supply of at least 650 W is required to meet the connector's design specification. Cards drawing more than 600 W cannot use this cable safely.
The GPU-side connector bends 90 degrees to relieve strain on the socket and reduce the chance of bent terminals or overheating from tight bends. Route the cable so the bend sits naturally without forcing the latch. The connectors are tested for 50 mating cycles, so avoid repeated plugging and unplugging during troubleshooting.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SeaSonic |
| Model name | Native 16-Pin Gen 5 12 V-2 × 6 600 W L-type white |
| Product color | White |
| Ports & slots | |
| First connector | 1x 12 V-2 × 6 |
| Second connector | 1x 12 V-2 × 6 |
| Connector count | 2 |
| Size & build | |
| Overall length | 700 mm |
| Cable length | 700 mm |
The cable is rated to carry up to 600 W continuously between a 12V-2x6 PSU output and a 12V-2x6 GPU input using 16 AWG conductors and High-Current System terminals.
The 12V-2x6 connector on both ends mates with either a 12V-2x6 or 12VHPWR socket on the graphics card and power supply, capping the link at the cable's 600 W rating.
The 90° L-type connector on the GPU side bends the cable close to the card, reducing bending stress and helping it fit in tight spaces between the graphics card and side panel.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?