Sick GTE6-P1212 Miniature Photoelectric Sensor PNP 10-30V DC 2m Cable

Miniature Photoelectric Sensor PNP 10-30V DC

The Sick GTE6-P1212 is a miniature photoelectric proximity sensor with a PNP switching output and a 2 m PVC cable. It operates on a 10 to 30 V DC supply with a visible red PinPoint LED at 650 nm. The rectangular ABS/PC housing measures 12 mm x 31.5 mm x 21 mm and carries an IP67 enclosure rating. A stainless steel mounting bracket is included in the box.

Suits automated lines needing a compact 250 mm

This sensor suits automated lines needing a compact 250 mm sensing range with a 500 Hz switching frequency and light/dark selection via a mechanical spindle. It is not for applications that require a sensing distance beyond 300 mm or a supply voltage outside the 10 to 30 V DC window. Buyers who need a different output logic or a connector termination instead of a flying lead should look at something else.

PNP output with 100 mA maximum load current

The single specification that decides fit is the PNP output rated at 100 mA maximum load current with a response time under 1,250 ms. The sensor delivers a light spot of Ø 7 mm at 90 mm distance and draws 30 mA with circuit protection A, B and D. Verify that your control input accepts PNP HIGH/LOW levels at VS minus 3 V before installing.