Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Photoelectric proximity sensor detects objects up to 350 mm with NPN dark-switching output, IP67-rated cylindrical M18 housing, and 2 m PVC cable
The Sick VTE18-3N4612 is a cylindrical photoelectric proximity sensor that uses energetic infrared detection for presence sensing in automation and machine-building environments. It delivers an NPN dark-switching output on a three-wire cable, suited for PLC inputs and simple control circuits. The M18 x 1 threaded housing allows direct mounting into standard sensor brackets or tapped plates without extra adapters.
Reliable detection spans 5 mm to 350 mm with a maximum reach of 400 mm, producing a 20 mm light spot at that distance and a dispersion angle of approximately 2.8°. Operation requires a 10 V DC to 30 V DC supply with ripple below 10 %, drawing up to 30 mA and switching loads up to 100 mA at 250 Hz with a 2 ms response time.
A 2 m PVC cable with 0.14 mm² conductors and 3.1 mm outer diameter provides the fixed connection, eliminating separate connector purchases but preventing quick-disconnect swaps. The PBT/PC plastic housing and PMMA optics meet IP67 enclosure rating for dust and temporary immersion, while the protection class III rating suits low-voltage control circuits. Operating temperature covers –25 °C to +70 °C for unheated indoor or sheltered outdoor use.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Sick |
| Model name | SICK VTE18-3N4612 |
The sensor has a maximum sensing range of 5 mm to 400 mm and a standard sensing range of 5 mm to 350 mm; both figures describe the same model, so no separate version choice is required.
It allows the NPN output to change state up to 250 times per second, with a 2 ms response time, suitable for detecting objects on fast conveyors or indexing stations.
The sensor draws up to 30 mA; voltage drop over the 0.14 mm² PVC cable must keep the supply above 10 V at the sensor, so keep cable runs short enough to stay within that limit.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?