Silicon Power SP128GBP34A60M28 128GB internal SSD
- 128 GB
- Up to 2,200 MB/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 drive with PCIe 3.0 x4 interface delivering sequential reads up to 2,200 MB/s and writes up to 1,600 MB/s
Capacity 512GB
The Silicon Power P34A60 is a 512GB internal SSD built for consumer laptops and desktops. It uses a PCIe 3.0 x4 interface and complies with NVMe 1.3. The M.2 2280 form factor fits modern slots in compact systems and ultrabooks.
The drive measures 80.00mm long, 22.00mm wide and 3.50mm high, weighing 8.00g. It uses TLC memory components and an advanced controller. The small footprint allows straightforward installation in tight chassis without extra brackets or cables.
Operating temperature spans 0°C to 70°C and the SSD has no mechanical components, so it runs silently. Power draw stays low during typical workloads. LDPC ECC, End-To-End data protection and a RAID engine maintain data integrity under sustained use.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Silicon Power |
| Product line | P34A60 |
| Model name | SU512GBP34A60M28SN |
| Part number | M.2 2280 (80 mm) form factor |
| Total capacity | 512 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 2,200 MB/s |
| Sequential write speed | Up to 1,600 MB/s |
| Storage | |
| NAND flash type | TLC |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 3.5 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 8g |
| Shipping weight | 0.03 kg |
| Package size | 130 × 84 × 18 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1500G / 0.5 ms |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
The PCIe Gen 3 x4 interface caps sequential reads at 2200 MB/s and writes at 1600 MB/s, matching the rated maximums for this 512GB model.
The drive measures 22.00mm wide, 80.00mm long and 3.50mm high, so it fits any standard M.2 2280 slot in laptops, desktops or ultrabooks.
Insert the drive at an angle into the M.2 slot, press it flat and secure it with the motherboard screw; the step often missed is fastening that screw, which keeps the drive from lifting and losing contact.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?