Silicon Power UD90 1TB internal SSD SU01KGBP44UD9005SN
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4TB M.2 2280 internal SSD using PCIe 4.0 with sequential reads up to 5000 MB/s and writes up to 4500 MB/s
Capacity 4TB
The Silicon Power UD90 is a 4TB M.2 2280 internal solid state drive built for consumer workloads that demand high sequential throughput. It connects through a PCIe 4.0 interface and delivers up to 5000 MBps read and 4500 MBps write speeds. The 3D NAND architecture supports sustained multi-tasking across creative applications.
On-board SLC caching boosts burst performance while low density parity check coding corrects transmission errors in real time. End-to-end data protection and RAID support add further integrity layers for critical project files. Host Memory Buffer technology reduces latency by using system DRAM for mapping tables.
The single-sided 3.50 mm module fits standard M.2 slots without heatsink clearance issues. Motherboard standoffs at 80.0 mm depth secure the 8 g drive in seconds. Ensure the BIOS recognises PCIe 4.0 and NVMe 1.4 to unlock full bandwidth; older chipsets may limit speeds to PCIe 3.0 levels.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Silicon Power |
| Product line | UD90 |
| Part number | SU04KGBP44UD9005SN |
| Total capacity | 4 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 5,000 MB/s |
| Sequential write speed | Up to 4,500 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Ports & slots | |
| Interface type | PCI-Express 4.0 |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 3.5 mm |
| Overall width | 22 mm |
| Product depth | 80.0 mm |
| Product weight | 8g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1500g/0.5 ms |
| More details | |
| Mean time between failures | 1,500,000 h |
Other versions of this model
The drive carries a 1,500,000-hour MTBF rating, indicating a very long expected service life under normal workloads before a replacement would be statistically likely.
Sequential write speeds reach up to 4500 MB/s; once the SLC cache fills during large continuous transfers, write throughput will drop to the native 3D NAND speed.
It is rated to operate between 0°C and 70°C; under sustained PCIe 4.0 loads the controller will throttle to stay within this thermal envelope.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?