We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12Gbps SAS cable with straight and right-angle SFF8087 connectors

SMUGDESK

SMUGDESK 12Gbps SAS SFF8087 Straight to Right Angle Cable

SKU CH-HRJA-1V2WK

Straight-to-right-angle SFF-8087 cable routes 12 Gbps SAS links cleanly inside tight server chassis

  • Straight-to-right-angle SFF8087 design eases tight-server routing
  • 12 Gbps SAS speed feeds RAID controllers and backplanes
  • 30 AWG low-loss wire cuts signal loss for stable links
  • Flat black low-profile connectors reduce bulk and aid airflow
  • 1 metre length suits rackmount servers, NAS and storage builds

Internal Server Cable

This SMUGDESK internal cable connects SAS devices using a straight SFF8087 connector on one end and a right-angle SFF8087 on the other. It is built for server chassis, RAID controllers and high-performance storage arrays where reliable 12Gbps bandwidth is required. The 1 metre length suits standard rackmount and NAS builds.

Ideal for Tight Chassis Routing

The right-angle plug reduces bulk at the backplane or controller, improving airflow and easing cable management in dense enclosures. The flat black low-profile connectors and 30AWG low-loss wire support clean, stable installations. Builders who need a straight-to-straight layout or external multilane connectors should look at a different cable.

12Gbps SAS Bandwidth

The cable is rated for 12Gbps SAS data transfer, which determines whether it matches your controller and backplane speed requirements. Verify that your hardware operates at this signalling rate before purchasing.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 80% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I route the straight-to-right-angle SFF8087 cable inside a tight server chassis?

Connect the straight SFF8087 end to the RAID controller or backplane first, then bend the flat 30AWG cable along the chassis wall to plug the right-angle end into the drive bay; the low-profile black connector clears adjacent cards and keeps airflow open.

What wear should I watch for on this 12Gbps SAS cable over time?

Inspect the 30AWG conductors and SFF8087 latch tabs during hardware swaps; replace the cable if the flat jacket shows kinks, the connectors feel loose, or SAS link errors appear in the controller log.

At what point does signal loss limit the 12Gbps SAS link on this one-metre run?

The 30AWG low-loss wire is specified for 12Gbps across the full one-metre length; the first limit under sustained use is typically the controller or backplane port budget, not the cable itself.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items