We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two flat black cables, each with one wide 15-pin plug splitting into four smaller SATA sockets spaced along 18-inch length

SMUGDESK

SMUGDESK 2-Pack SATA 15-Pin to 4 SATA Power Splitter Cord 18in

SKU CH-SMBT-83654

Turns one 15-pin SATA power port into four outputs for 2.5 and 3.5 inch drives, 18 inches long with 4.5 inch spacing and positive-lock connectors

  • One PSU port powers four drives with two 18 inch splitter cables
  • 18 AWG 1007 copper wire delivers steady 3.3V 5V 12V power to each device
  • Female ports spaced 4.5 inches apart keep routing tidy and airflow clear
  • Positive lock connectors click tight to stop vibration disconnects inside the case
  • Two pack adds spare cables for multi drive builds without a PSU upgrade

15-Pin SATA to Four SATA Power Splitter

This 15-pin SATA power splitter cable expands one PSU connector into four SATA outputs. The 2-pack includes two 18-inch cords built with 18AWG 1007 copper wire. Each cable supports 3.3V, 5V and 12V rails for SATA I, II and III hard drives, SSDs and optical drives. Positive-lock connectors click securely to prevent accidental disconnection.

Desktop builders adding multiple drives

Suits PC builders upgrading storage in full-size or mid-tower cases who need to power several 2.5-inch SSDs, 3.5-inch HDDs or optical drives from a single PSU port. The 4.5-inch spacing between ports aids tidy routing and airflow. Not for systems that lack a spare 15-pin SATA power connector or builders whose PSU cannot deliver enough total wattage for all attached drives.

Single 15-pin SATA port becomes four outputs

The decisive specification is that one 15-pin SATA power plug splits into four female SATA connectors per cable. Verify your power supply has a free 15-pin SATA port and sufficient overall capacity before connecting up to four drives per splitter. Each 18-inch harness uses UL-rated 18AWG 1007 wire for steady power delivery.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 72% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will the 18-inch SATA splitter reach drives mounted in a full-size tower alongside my existing cables?

Each cable is 18 inches long with SATA female ports spaced at 4.5-inch intervals, providing enough length for clean routing in full-size and mid-tower cases while keeping airflow clear.

How can I confirm the splitter is delivering stable power to my drives after installation?

The positive-lock SATA connectors click securely into place, preventing accidental disconnection from vibration; verify in BIOS or OS that all connected 2.5-inch SSDs, 3.5-inch HDDs and optical drives are detected and spin up reliably.

Does the 2-pack include any extra adapters or mounting hardware, or just the splitter cords?

The pack contains two 15-pin to 4 SATA power splitter cords only; no additional adapters or mounting hardware are included, so ensure your power supply has a free 15-pin SATA port and sufficient total wattage for all drives.

More in Y-Splitter Power Cables

Similar items