SMUGDESK 2Pack 6Inch Molex 4Pin to Dual SATA 15Pin DownAngle Female Power Splitter Cord
Converts one Molex connector into two down-angle SATA power ports for 2.5 and 3.5 inch drives using 18AWG wiring
- Converts one Molex port into two SATA power connections
- Down-angled SATA connectors save chassis space and improve airflow
- 18AWG tinned copper wiring delivers stable power to drives
- Locking latches prevent loose connections and power drop-off
- Plug-and-play installation adds SATA power to older PSUs
Power Splitter for Multi-Storage Builds
This two-pack of Molex to dual SATA power splitters adds extra drive connections when a power supply lacks enough native SATA outputs. Each 6-inch cord converts one 4-pin Molex male connector into two down-angle SATA 15-pin female ports. The short length suits compact chassis where cable routing space is tight. Builders expanding storage in older systems will find these adapters a direct fit.
Stable Power Delivery Under Load
Heavy-duty 18AWG tinned copper conductors minimise voltage drop when multiple drives spin up simultaneously. The wiring is rated to sustain the current draw of 2.5" SSDs, 3.5" HDDs and optical drives without power dropoff. Fully insulated black jackets protect the conductors from abrasion inside a crowded case. Locking latches on every connector keep contacts seated during vibration or thermal cycling.
Plug-and-Play Installation
Simply insert the Molex male end into the power supply and press the down-angle SATA plugs onto each drive until the latches click. The right-angle profile lies flat against drive housings, clearing adjacent components and improving airflow. Do not exceed the maximum current load of the Molex channel; the cable transmits power only and carries no data. Drives are not included with the adapter set.
How it compares
Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 433 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 18 AWG wiring on these 6 inch cables handle continuous power draw without overheating?
The 18 AWG tinned copper conductors are designed to minimise voltage drop and deliver stable high current power to 2.5 inch SSDs and 3.5 inch HDDs during all day operation.
My power supply only has Molex 4 pin outputs — will these splitters connect directly without extra adapters?
Yes, the Molex 4 pin male end plugs straight into your PSU Molex port and each cable provides two down angle SATA 15 pin female connectors for drives.
Will the down angle SATA connectors fit alongside older 3.5 inch hard drives that have tight side clearance?
The right angle SATA female connectors lie flat against the drive body saving chassis space and reducing cable strain in compact builds.
More in Y-Splitter Power Cables
Similar items
Cable Matters SATA to 3 Pin 4 Pin Fan Splitter 15 pin to 4 x 3 pin 4 pin 28cm 2pcs
- DVI to DVI
- Female to Female
SXDOOL 16 AWG 8-Pin to Dual 8-Pin (6+2) Power Splitter Cord 30.5 cm 4-Pack
- Case Fan Accessory
upHere 1-to-2 ARGB Splitter Cable 1.9 cm 2 Pack
- Lightning to Male-t…
- Male to Male
SXDOOL KZ5387 6-pin to dual 6+2-pin power splitter cord 5pcs 20cm 18AWG
- Case Fan Accessory
Cable Matters 1007 4-pin PWM fan 1-to-5 splitter 2-pack 40cm braided
- Test Value
- DVI to DVI





