SMUGDESK 90° Down Angled USB 2.0 Male to Male Flat Ribbon Flex Cable 2.0M 480Mbps
A 90° down-angled flat ribbon USB 2.0 cable with male-to-male connectors for 480 Mbps data and charging in tight spaces over 2.0 m
- 90° down-angled connector fits tight gaps and embedded installs
- Flat ribbon flex cable routes cleanly in confined spaces
- USB 2.0 delivers 480 Mbps data and steady charging
- Male-to-male link connects two Type-A devices directly
- 0 m length suits long fixed wiring and multi-device setups
2.0 m 90° Down-Angled USB 2.0 Cable
This 2.0 metre flat ribbon cable connects two USB Type-A ports using a low-profile 90° down-angled connector on one end. The ultra-thin flexible construction allows tidy routing in confined spaces such as embedded enclosures or behind office equipment. It carries both data and power over a single run.
Installers needing a space-saving link between
The male-to-male layout suits point-to-point connections where both ends present a standard Type-A socket, such as printer-to-PC or hub-to-embedded-board setups. Builders who require a Type-C or Micro-B endpoint, or who need USB 3.x throughput, should select a different cable.
Push both Type-A plugs firmly until they click
The flat ribbon bends easily but should not be folded sharply at the connector junction; excessive creasing can fracture the internal conductors. Allow a gentle radius at the 90° exit and secure the cable with ties if vibration is present.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
Do both devices need a USB Type-A port for this male-to-male cable to connect them?
Yes, each end has a standard USB 2.0 Type-A male plug so both devices must provide a matching Type-A socket.
Will the 90° down-angled plug still seat properly next to a legacy USB 1.1 port on older equipment?
The connector follows the standard Type-A form factor, so it fits legacy USB 1.1 receptacles while the cable negotiates the highest mutually supported speed.
How can I confirm the link is running at the rated 480 Mbps after installation?
Check the host controller properties or device manager on either connected computer; it should list the connection speed as 480 Mbps when the link is active.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT6BK usb cable
- Connector on First…
- Data Transfer Cable
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4





