We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9.5 inch cable with 8 pin female and 4 pin male connectors

SMUGDESK

SMUGDESK CPU 8 Pin Female to ATX 4 Pin Male Power Adapter Cord 9.5 Inch

SKU CH-WHQ7-MTVJT

Converts an ATX 4-pin supply to an 8-pin CPU socket with a 9.5-inch cable for tidy case routing

  • Converts 4-pin PSU output to 8-pin CPU power for motherboard compatibility
  • 5-inch length enables tidy cable routing inside ATX and mid-tower cases
  • Molded connectors maintain firm contact to prevent power drops from vibration
  • Insulated conductors deliver stable power to the CPU under normal loads
  • Plug-and-play design simplifies DIY builds, upgrades and older PSU adaptation

Power Supply Adaptation

This adapter converts an ATX 4 Pin male output from a power supply into a CPU 8 Pin female connector for a motherboard socket. It enables builders to use power supplies that only provide a 4 Pin CPU power port with modern boards requiring an 8 Pin interface. The 9.5 inch length supports tidy internal routing inside ATX and mid-tower chassis. Molded connectors and insulated wires maintain a firm connection and stable power delivery under normal loads.

Suited For Standard Builds

The cable suits DIY assemblers upgrading older power supplies or fitting office PCs where the CPU draws standard power. It is a plug and play solution for hardware refreshes and older system renovation without driver installation. Builders running high power overclocked processors should look elsewhere because the adapter is not recommended for those loads. Users needing a native 8 Pin source from the PSU will require a different power supply unit.

9.5 Inch Cable Length

The 9.5 inch length is the key dimension that determines fit inside a case and reaches the CPU power header without excess slack. It balances reach for mid-tower layouts against cable clutter that longer runs create. If the routing path from the PSU to the motherboard socket exceeds this distance the adapter will not connect. Measure the internal path before purchase to confirm compatibility.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 60% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What does the 9.5-inch length mean for cable routing inside my case?

The 9.5-inch length provides enough reach to route the cable neatly behind the motherboard tray or along case channels, reducing clutter while connecting the PSU to the CPU power socket.

What does the ATX 4-pin to CPU 8-pin conversion actually support in practice?

It lets a power supply with only a 4-pin ATX CPU connector power a motherboard that requires an 8-pin EPS connector, delivering stable power for standard operating loads.

How much space does the molded connector need to fit behind the motherboard?

The precision-molded connectors are designed to maintain a firm connection within standard ATX and mid-tower chassis clearances, allowing the cable to sit flush against the board edge.

More in Jumper & Adapter Power Cords

Similar items