SMUGDESK DisplayPort 1.4 cable 6.6 ft 8K 60Hz 4K 144Hz
A 6.6 ft DisplayPort 1.4 cable carrying 8K at 60 Hz, 4K at 144 Hz and 1440p at 165 Hz with 32.4 Gbps bandwidth, gold-plated connectors and a braided nylon jacket
Cable Length 6.6 Feet
- 3.3 Feet$11.99
- 6.6 Feet$11.99
- 10 Feet$14.99
- 16.4 Feet$18.99
- 33 Feet$33.99
- 8K 60 Hz gaming clarity backed by 7680×4320 resolution support
- 4K 144 Hz ultra-smooth motion enabled by 32.4 Gbps bandwidth
- 10000-plus plug cycles durability from nylon braid and gold-plated connectors
- Triple-shielded solid copper conductors keep signals clean at 32.4 Gbps
- Backward compatible with DisplayPort 1.3 1.2 1.1 for wide device support
Purpose & fit
This DisplayPort 1.4 cable carries 8K at 60 Hz, 4K up to 144 Hz, 1440p at 165 Hz and 1080p at 240 Hz. It suits gamers and creators who need high refresh rates or HDR on a 6.6 ft run between a graphics card and a monitor. It does not fit Mini DisplayPort or HDMI ports, so buyers with those connectors need a different cable.
Build & connectors
Male-to-male DisplayPort plugs use 24K gold-plated contacts inside aluminium alloy shells. The 26-30 AWG solid copper conductors are triple-shielded and wrapped in a nylon braid over PVC rated for 10000 insertions. Backward compatibility with DisplayPort 1.3, 1.2 and 1.1 means it works with older gear without signal degradation.
Bandwidth & limits
The HBR3 link delivers 32.4 Gbps and supports DSC 1.2 compression, FEC and 32 audio channels with HDR10 and HDCP 2.2. At 6.6 ft the cable meets the full 8K 60 Hz spec, but longer runs would reduce the maximum resolution or refresh rate. It cannot carry Ethernet or USB data, so separate cables are required for those functions.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 1.4 cable 3.3ft 8K@60Hz 4K@144Hz 1440p@165Hz 1080p@240Hz
SMUGDESK DisplayPort 1.4 cable 3.3 ft 8K 60 Hz 4K 144 Hz 1440p 165 Hz
SMUGDESK DisplayPort 1.4 cable 6.6 ft 8K 60Hz 4K 144Hz 1440p 165Hz
Questions about this item
What bandwidth does the DisplayPort 1.4 cable support, and what resolution and refresh rate does that enable?
The cable carries 32.4 Gbps HBR3 bandwidth, which is a 50 percent increase over DisplayPort 1.2, allowing 8K at 60 Hz, 4K at 144 Hz and 1440p at 165 Hz with DSC 1.2 compression and FEC forward error correction.
What are the connector dimensions and jacket material so I can check clearance behind my monitor?
Each end has a standard full-size DP male plug with an aluminium alloy shell and 24K gold-plated pins; the cable itself is wrapped in a nylon braided jacket over PVC for durability and 10000-plus insertion cycles.
Do I need to configure anything in Windows or the GPU driver after plugging the cable in for 4K 144 Hz?
No driver install is required; simply connect both DP 1.4 ends, then open Windows Display Settings or the GPU control panel and select 3840x2160 at 144 Hz — ensure the monitor’s OSD is also set to DP 1.4 mode if it has a version toggle.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A285 DisplayPort 2.0 cable 3.3 ft green 80 Gbps 16K@60Hz
- 3.3 ft (1.01 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort 1.4 cable 6.6 ft 8K@60Hz 4K@144Hz HBR3 32.4 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE TJ-A028 DisplayPort 1.4 extension cable 6.6 ft 8K@60Hz 4K@144Hz 2K@240Hz 32.4 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable










