SMUGDESK DisplayPort 2.0 Cable 10FT 80Gbps 16K@60Hz 4K@240Hz
A 10 ft DisplayPort 2.0 cable rated for 80 Gbps bandwidth with support up to 16K at 60 Hz and 4K at 240 Hz
- 80 Gbps bandwidth for loss-free 16K 60 Hz video
- 4K at 240 Hz refresh eliminates motion blur in games
- 10 ft length fits large desk or living-room setups
- Backward compatible with DP 1.4 and 1.2 hardware
- Braided nylon jacket resists wear during frequent reconnects
10 ft DisplayPort 2.0 cable for high-resolution
This 10 ft DisplayPort 2.0 cable delivers 80 Gbps bandwidth and supports 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz. It is built for gamers and professionals who need high refresh rates and HDR on a single display. The cable is backward compatible with DisplayPort 1.4 and 1.2 devices. It also supports FreeSync and G-Sync variable refresh technologies.
Bandwidth ceiling and DSC requirement at top
The 80 Gbps link enables 16K at 60 Hz only with DSC 1.2a compression active. Uncompressed 16K exceeds the cable's raw bandwidth, so the source and sink must both implement DSC. At 4K the cable can handle 240 Hz, but lower resolutions such as 2K reach 360 Hz only when the graphics card and monitor timings allow. HDR 4:4:4 and HDCP 2.2 are supported within the same bandwidth envelope.
Check source and sink capabilities before ordering
Verify that your graphics card and monitor both have DisplayPort 2.0 ports rated for UHBR10 or higher. Confirm the GPU driver and monitor firmware support the target resolution and refresh rate with DSC enabled. The cable's 20-pin power line is disabled, so it cannot supply power to active adapters. Ensure your devices do not rely on pin-20 power for signal negotiation.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 68% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort Cable 2.1 10FT 80Gbps 16K@60Hz 8K@120Hz 4K@240Hz
Questions about this item
Which length should I choose for my desk setup?
The cable is supplied in a 10 ft length, giving roughly three metres of reach between a graphics card and a monitor on a typical desk.
What does the 80 Gbps bandwidth actually deliver on my screen?
It enables 16K at 60 Hz, 8K at 120 Hz or 4K at 240 Hz with HDR and DSC 1.2a, provided the GPU and monitor support those modes.
Is the DisplayPort 2.0 connector fully pinned?
The 20-pin power line is disabled, so the cable carries only video and auxiliary data; it still meets the VESA UHBR10 spec and works with DP 1.4 and 1.2 ports.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
Belkin F2CD000B10-E displayport cable 10 ft
- 0.5 ft (0.15 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
Monoprice Inc. 6016 DisplayPort to DVI cable 10 ft 28AWG white
- 10 ft (3.05 m)
- Video Cables
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Tripp Lite P580-015 displayport cable 15 ft
- 15 ft (4.57 m)
- DisplayPort Cable










