SMUGDESK DisplayPort 2.0 cable 3.3 ft 80 Gbps 16K@60 Hz 4K@240 Hz
A 3.3 ft DisplayPort 2.0 cable delivering 80 Gbps bandwidth for 16K at 60 Hz or 4K at 240 Hz with HDR10 and DSC 1.2a
- 80 Gbps bandwidth drives 16K at 60 Hz
- 4K at 240 Hz refresh for fluid gaming
- 28 AWG tinned copper with triple shielding resists interference
- Nylon braid rated for 30000 bends adds durability
- Gold-plated connectors prevent tarnish for lasting conductivity
What this cable delivers
The SMUGDESK DisplayPort 2.0 cable carries 80 Gbps bandwidth over a 3.3 ft length. It supports 16K at 60 Hz, 8K at 120 Hz, and 4K at 240 Hz. The link is backward compatible with DP 1.4 and 1.2. It suits PC, laptop, and monitor setups that need the highest current DisplayPort throughput.
Shielding and durability
Triple-layer shielding wraps 28 AWG tinned copper conductors to reject interference. A nylon braided jacket is rated for 30000 plus bend cycles. Gold-plated 24K connectors resist tarnish and maintain conductivity over time. The construction aims for stable video and audio transmission without signal loss.
The deciding spec
Bandwidth of 80 Gbps determines whether this cable can drive 16K 60 Hz or 4K 240 Hz without compression. If the source and sink both support DisplayPort 2.0 UHBR20, the cable will pass the full rate. Buyers whose hardware tops out at DP 1.4 will not use the extra headroom.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 60% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 1.4 cable 10 ft 8K@60Hz 4K@144Hz 2K@240Hz HBR3 HDR FreeSync G-Sync Braided
Questions about this item
How do I connect the SMUGDESK DisplayPort 2.0 cable and what step is often missed?
Plug the 24K gold-plated connectors into the DisplayPort 2.0 ports on both the graphics card and monitor, then verify the source device and GPU driver actually support the target resolution and refresh rate.
What part of this cable wears out first and when should I replace it?
The nylon braided jacket is rated for 30000+ bend cycles; replace the cable if the shielding is exposed, connectors loosen, or signal dropouts appear at 16K@60Hz or 4K@240Hz.
What limit appears first during a long gaming session at 4K 240 Hz?
The 80 Gbps bandwidth ceiling and DSC 1.2a compression define the maximum sustained throughput; ensure the GPU and monitor maintain the link without thermal throttling.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A285BK DisplayPort 2.1 cable 10 ft 80Gbps 16K@30Hz
- 10 ft (3.05 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort cable 10 ft
- 10 ft (3.05 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE A0108 DisplayPort 2.1 cable 6.6 ft 80Gbps 16K@60Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable










