SMUGDESK DisplayPort extension cable 3.3 ft 8K 60 Hz 32.4 Gbps
A 3.3 ft DisplayPort extension cable supporting 8K at 60 Hz and 4K at 144 Hz with 32.4 Gbps bandwidth
- Extends your DisplayPort reach by 3.3 ft without signal loss
- Delivers 8K at 60 Hz with 32.4 Gbps bandwidth
- Gold-plated connectors resist corrosion for lasting reliability
- Braided aluminium foil and bare copper shield high-speed data
- Protects GPU and monitor ports from repeated plug wear
8K DisplayPort extension cable
This 3.3 ft extension cable adds reach to an existing DisplayPort link while supporting 8K at 60 Hz and 4K at up to 240 Hz. It complies with the 1.4 specification and delivers 32.4 Gbps bandwidth with HBR3, DSC 1.2 and HDCP 2.2. Gold-plated connectors and braided shielding protect signal integrity.
Gamers and media users needing extra length
The cable suits setups where the GPU or monitor port is hard to reach, and it reduces wear from frequent unplugging. It works with FreeSync and G-Sync for tear-free gaming. Buyers who need a longer run than 3.3 ft or who require an active optical cable for greater distance should look elsewhere.
Plug-and-play installation
Connect the male end to the source and the female end to the existing cable; no drivers are required. The woven nylon jacket resists snagging, but tight bends near the connectors can stress the joint. Ensure both host and display support the target resolution and refresh rate to avoid fallback to lower modes.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 65% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 1.4 Extension Cable 6.6 ft 32.4 Gbps 8K Braided
SMUGDESK DisplayPort Extension Cable 6.6 ft 8K@60Hz 32.4 Gbps HDR Black
SMUGDESK USB C to USB C Cable 3.3ft 2-pack 100W 5A 480Mbps Nylon Braided
Questions about this item
What DisplayPort source and display do I need so this 3.3 ft extension cable can pass an 8K 60 Hz signal at 32.4 Gbps?
You need a DisplayPort 1.4 source and a DisplayPort 1.4 display, both running at HBR3, so the extension can carry the full 32.4 Gbps bandwidth required for 7680×4320 at 60 Hz.
Will this extension cable work with my existing DisplayPort 1.2 monitor that runs at 1440p 165 Hz and supports FreeSync?
Yes, the cable is backwards compatible with DisplayPort 1.2 and will pass 2560×1440 at 165 Hz with FreeSync or G-Sync active.
How can I confirm the cable is delivering 8K 60 Hz HDR after I connect it?
Check your GPU control panel or monitor OSD to verify the active resolution shows 7680×4320 at 60 Hz with HDR enabled, and run a high-motion test to confirm tear-free output.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
LUOM TJ-A285BK DisplayPort 2.1 cable 6.6 ft 80 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE BK-CD2 USB-C to DisplayPort 1.4 cable 6.6ft 8K 60Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort cable 10 ft 8K 60Hz 4K 144Hz HBR3 32.4 Gbps
- 10 ft (3.05 m)
- DisplayPort Cable










