We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 50 cm Mini SAS HD SFF-8643 cable with locking connectors on both ends

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to SFF-8643 Cable 50cm

SKU CH-551F-KVJ5Z

A 50cm internal cable with SFF-8643 connectors links RAID controllers or HBA cards to drive backplanes for SAS and NVMe storage arrays

  • SFF-8643 straight-through link connects RAID and HBA cards directly
  • 50cm length keeps internal routing tidy and airflow clear
  • High-shielded construction reduces crosstalk for stable SAS and NVMe speeds
  • Locking latches prevent accidental disconnects under rack vibration
  • Compatible with backplanes and enclosures using SFF-8643 interfaces

Internal RAID cable for servers and NAS

The SMUGDESK Mini SAS HD cable carries SFF-8643 connectors on both ends, linking RAID controllers or HBA cards directly to drive backplanes inside enterprise servers, DIY storage boxes and network-attached storage appliances. It is built for IT integrators and data-centre technicians who need dependable internal links for multi-disk arrays.

Shielded 50cm run with locking latches

Professional shielding and controlled impedance suppress crosstalk and electromagnetic interference during sustained heavy read-write workloads. The half-metre length keeps routing tidy, aids chassis airflow and leaves no slack to snag during upgrades. Locking latches on each connector resist vibration-induced loosening in rack-mounted gear.

Verify SFF-8643 ports and clearance

Confirm that both your controller and backplane expose SFF-8643 sockets before ordering. Check that a 50cm reach suits your chassis layout and that adjacent components leave room for the latch mechanism to engage fully. This cable serves SAS and NVMe enclosures using the SFF-8643 interface only.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 80% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the SFF-8643 Mini SAS HD interface limit the SAS signalling speed in practice?

The cable uses SFF-8643 connectors on both ends for straight-through connection, maintaining the full controller and backplane rate without added bottleneck

What clearance and connector orientation does the 50cm cable need to fit inside a server chassis?

Straight SFF-8643 male plugs with locking latches require enough depth for the latch release and a bend radius that avoids sharp folds near the connector body

How is the cable installed, and which step is often missed?

Align each SFF-8643 plug with the port, push until both locking latches click audibly, then verify the latch tabs are fully seated so vibration cannot unseat them

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items