SMUGDESK USB-C to USB-C PD 3.1 cable 240W 5A LED display E-Marker chip 480Mbps
USB-C cable delivers up to 240 W charging with a real-time LED power display and built-in E-Marker chip for safety, plus 480 Mbps data transfer
Length 1M
- 1M$15.99
- 2M$13.99
- 240W PD 3.1 charging powers high-performance laptops
- LED display shows real-time voltage and current
- E-Marker chip protects against overvoltage and short circuit
- 480 Mbps data transfer syncs files between USB-C devices
- Braided shell resists bending for longer cable life
SMUGDESK USB-C PD 3.1 cable 240W
This SMUGDESK USB-C to USB-C cable supports the PD 3.1 standard and delivers up to 240W at 5A. An integrated LED display shows real-time voltage, current and power. A built-in E-Marker chip provides over-voltage, over-current and short-circuit protection. Data transfer runs at 480Mbps.
Suits high-power laptops and tablets.
The cable targets users who need maximum charging speed for devices such as a MacBook Pro 16-inch, iPad Pro or gaming laptop. It also serves anyone who wants visible confirmation of the charging rate. Buyers who require video signal output should look at a different cable because this model does not support that function.
PD 3.1 240W rating decides compatibility
Full 240W charging only occurs when both the charger and the device support PD 3.1 at 48V/5A. With a lower-rated charger the cable will negotiate a lower power level. Check your power adapter specification before purchasing.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 55% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Other versions of this model
3 more in the same range
Questions about this item
What does the PD 3.1 standard cap charging at on this cable?
The PD 3.1 standard on this cable caps charging at 240W with 5A current at 48V, but you must use a PD 3.1 certified high-power charger to reach that speed.
What physical connector does this cable need to fit your device?
This cable uses USB-C connectors on both ends, so your device needs a USB-C port to plug it in.
How do you set up the LED display and what step do people miss?
The LED display activates automatically when charging starts; the step people miss is pairing it with a PD 3.1 charger, otherwise the display will show lower power instead of the full 240W.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ001 USB4 Gen 3x2 Cable 5 ft Copper 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
ESTONE TJ-A323 USB4 cable 6.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4








