We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin rectangular E3.S 7.5mm SSD with silver metal casing and gold edge connector

Solidigm

Solidigm SB5PHA7E016T001 enterprise SSD 1.6TB E3.S 7.5mm PCIe 5.0 x4

SKU CH-KYM5-VAQFC MPN SB5PHA7E016T001

E3.S 7.5mm enterprise SSD delivering 1.6TB of 176L TLC storage with PCIe 5.0 speeds up to 14500 MBps read and 4100 MBps write

  • Total capacity1.6 TB
  • Sequential read speedUp to 14,500 MB/s
  • Sequential write speedUp to 4,100 MB/s
  • Interface typePCI-Express 5.0
  • Form factorE3.S 7.5 mm
  • NAND flash type176L TLC 3D NAND

Model 1.6TB E3.S

Show 12 more
  • 6TB capacity supports dense server storage
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
  • 176L TLC 3D NAND enables 2350000 IOPS random read performance
  • 3 DWPD endurance rating provides 8.7 PBW total writes
  • 5W idle and 17W active power draw reduces thermal load

E3.S 7.5mm enterprise SSD for dense servers

The Solidigm D7-PS1030 delivers 1.6TB of storage in the E3.S 7.5mm form factor using PCI-Express 5.0. It targets data-centre operators who need high-capacity flash in a slim, hot-pluggable module. The drive employs 176L TLC 3D NAND rated for three drive writes per day.

Thermals noise and power in normal use

Idle power sits at 5W while active power reaches 17W under load. The operating temperature range spans 0°C to 77°C without a specified acoustic rating. Shock tolerance is rated at 1,000 G for 0.5 msec and vibration tolerance at 2.17 GRMS across 5 to 700 Hz during operation.

No bundled accessories or software included

The single-pack shipment contains only the drive itself; no mounting hardware, cables or management utilities are supplied. Buyers who need brackets, thermal pads or proprietary firmware tools must source them separately. The drive carries a 2,500,000-hour MTBF and 8.7 PBW endurance rating.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $1,772.99
Pricier than about 63% of the 1,039 comparable items (median $992.99).
Total capacity 1.6 TB
Lower than about 63% of the 522 comparable items (median 3.2 TB).
Sequential read speed Up to 14,500 MB/s
Higher than about 90% of the 311 comparable items (median 6,500 MB/s).
Price per TB $1,108.12 per TB
Pricier than about 82% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSolidigm
Model nameD7-PS1030
Part numberSB5PHA7E016T001
Total capacity1.6 TB
Performance
Sequential read speedUp to 14,500 MB/s
Sequential write speedUp to 4,100 MB/s
Random read (4K)2,350,000 IOPS (4K Blocks)
Random write (4K)350,000 IOPS (4K Blocks)
Storage
NAND flash type176L TLC 3D NAND
Write endurance3 DWPD / 8.7 PBW
Ports & slots
Interface typePCI-Express 5.0
Power
Idle power draw5 W
Active power draw17 W
Size & build
Form factorE3.S 7.5 mm
Product weight110g +/- 10g
Shipping weight0.17 kg
Package size140 × 110 × 17 mm
Environment & compliance
Operating temperature range0 °C to 77 °C
Max shock tolerance1,000 G (Max) at 0.5 msec
Vibration toleranceOperating: 2.17 GRMS (5–700 Hz) Max
Non-Operating: 3.13 GRMS (5–800 Hz) Max
More details
Mean time between failures2,500,000 h

Other versions of this model

5 more in the same range

Questions about this item

How do I install the E3.S 7.5mm drive and what step is often missed?

Slide the drive into the E3.S bay until the connector seats fully, then secure it with the single retention screw; the step most often missed is tightening that screw, which keeps the PCIe 5.0 x4 link stable under vibration.

What maintenance or replacement will the 176L TLC NAND need later?

The drive is rated for 3 DWPD and 8.7 PBW total writes; once that endurance budget is consumed the NAND can no longer guarantee data retention and the drive must be replaced.

What limit appears first during sustained heavy writes?

The sequential write ceiling of 4100 MBps is reached before the 17 W active power envelope or the 77 °C temperature limit, so sustained write throughput tops out at that figure.

More in Server & Data Center SSDs

Similar items