Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 300W through a 20-pin ATX connector with dual fans and active PFC for server builds
The Sparkle FSP300-601U is a 300W single power supply built to the ATX and ATX12V standard. It uses a 20-pin main connector and delivers +3.3V at 20A, +5V at 25A and +12V at 16A. The unit accepts 90-264V input at 47-63Hz for worldwide rack deployment.
Two internal fans run under thermal speed control to keep noise low while the supply operates at full load up to 40°C. Efficiency is rated at 68% under maximum output with active power factor correction meeting EN61000-3-2. MTBF reaches 100000 hours at 25°C and hold-up time is 17ms minimum.
This supply fits servers and workstations that still require a 20-pin main connector rather than the newer 24-pin design. The jump is worth it when the original unit has failed or when ripple and noise have risen beyond spec. It does not suit builds needing redundant power or 24-pin motherboards.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SPARKLE |
| Model name | FSP300-601U |
| Product type | Complied with ATX and ATX12Vstandard |
| Ports & slots | |
| Output type | +3.3 V@20A; +5 V@25A; +12 V@16A;;; +5SB@2A |
| Power | |
| Max wattage | 300 W |
| Power efficiency | 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output |
| Power supply redundancy | Single |
| Main power connector | 20Pin |
| Supply voltage | 90–264 V |
| AC input frequency | 47–63 Hz |
| Rated input current | 6A @ 115 V, 3A @ 230 V |
| Power hold-up time | 17 ms min. |
| Size & build | |
| Product dimensions | 3.9 in × 1.6 in × 8.0 in |
| Shipping weight | 1.52 kg |
| Package size | 203 × 102 × 51 mm |
| Environment & compliance | |
| Humidity range | 5 to 95% on operating and storage |
| Temperature range | 0 °C to 40 °C on full load |
| More details | |
| Fan configuration | 2 |
| Mean time between failures | 100,000 h on maximum load at 25 °C degree |
Two internal 12 V DC fans run under thermal speed control; the Noise Killer function slows them when temperatures allow, keeping acoustic output low during continuous operation.
The supply terminates in a 20-pin ATX main connector, so the host board must provide a matching 20-pin socket or a 24-pin socket that accepts the 20-pin plug.
Yes — the unit accepts 90 to 264 V at 47–63 Hz and draws 3 A at 230 V, so it connects directly to standard 230 V rack power distribution without a selector switch.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?