Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 7 ft Cat 6 UTP patch cable with RJ-45 connectors supporting up to 10 Gbps at 250 MHz over 160 ft, 24 AWG stranded copper, 100 W PoE and UL-rated wire
This 7 ft Cat 6 patch cable uses 24 AWG stranded 100% copper conductors rated to 250 MHz. Molded RJ-45 connectors on both ends include strain relief to reduce stress at the plug termination point. The blue jacket is UL listed under E132276-A and ETL verified for safety compliance.
Replacing a Cat 5e cord with this Cat 6 cable enables 2.5 Gbps and 5 Gbps operation alongside standard 1 Gbps and 10 Gbps links. The jump is worth it when switches, routers or NAS devices support multi-gigabit ports and the run stays within the rated distance. Existing Cat 5e cables remain adequate for 1 Gbps-only equipment.
The Cat 6 standard supports 10 Gbps only up to 160 ft; longer runs drop to 1 Gbps regardless of cable quality. PoE delivery is rated to 100 W, so high-power devices such as pan-tilt-zoom cameras or access points can be powered over the same conductors. Installations needing 10 Gbps beyond 160 ft require Cat 6a or higher cabling.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | C6PATCH7BL |
| Product type | Others |
| Product color | Blue |
| Connectivity | |
| Cable category | 6 |
| Ports & slots | |
| First connector | 1 x RJ-45 Male |
| Second connector | 1 x RJ-45 Male |
| Size & build | |
| Overall length | 7 ft (2.13 m) |
| Shipping weight | 0.10 kg |
| Package size | 220 × 198 × 23 mm |
The cable has an RJ-45 male connector on both ends, so it plugs straight into any standard Ethernet port on a router, switch or network card.
Route the cable so the molded strain-relief boot is not forced into a sharp bend; the boot is designed to keep the cable from kinking right at the connector.
The 24 AWG 100 % copper conductors are rated for 100 W PoE, and the UL-rated jacket (E132276-A) maintains that capacity over the cable's service life.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?