We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel 1U vented rack shelf 10 inches deep no front lip disassembled with mounting hardware

StarTech.com JCM-RSNoLip 1U Vented Server Rack Shelf 10 Inches Deep No Lip

SKU CH-M48B-NGWGF

A vented 1U steel shelf mounts in standard 19-inch racks, 10 inches deep with no front lip and a 22-pound capacity

  • Rack height42U
  • Load capacity22 lb (9.98 kg)
  • Spec summary10 in Deep, Metal, Rack Mount, 10 L x 19 W x 1.75 H inches
  • Standards met10 in Deep
  • Product dimensions10 in × 19 in × 1.75 in
  • Product weight1.311 kg
  • Vented design improves airflow for mounted equipment
  • 10 inch depth fits shallow 19 inch racks
  • No front lip maximises usable shelf space
  • Reinforced front rib supports up to 22 pounds
  • Ships disassembled with hardware for flexible installation

Universal 19-inch rack tray

This 1U vented shelf fits standard 19-inch cabinets and measures ten inches deep. It ships disassembled so you can configure it for different equipment layouts. The front edge has no lip, freeing the full depth for devices that overhang. A reinforcing rib replaces the lip to maintain rigidity.

Vented steel construction

Perforated steel allows passive airflow through the tray while supporting up to 22 pounds. The 1.2 millimetre side panels add strength without excess bulk. At 1.75 inches high the unit occupies a single rack unit and weighs 1.311 kilograms. No moving parts means silent operation and zero power draw.

Tool-free mounting flexibility

Four M6 screws with cage nuts and four M5 screws with nuts are included for quick installation. The cantilever design leaves the rear open for cable routing or deeper chassis. Builders who need a front retention lip or a deeper platform will need a different shelf model.

How it compares

Measured against everything we stock in Rack Cabinets & Shelves, at today’s prices. Recalculated every night.

Price $28.99
Cheaper than about 90% of the 2,764 comparable items (median $106.99).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameStarTech.com
Model nameJCM-RSNoLip
Part numberJCM-RSNoLip
Product colorBlack
Size & build
Rack height42U
Main materialSteel
Load capacity22 lb (9.98 kg)
Product dimensions10 in × 19 in × 1.75 in
Product weight1.311 kg
Packed dimensions3.2004 cm × 26.4922 cm × 44.704 cm
Weight with packaging1.311 kg
Environment & compliance
Standards met10 in Deep

Questions about this item

How do I assemble the disassembled shelf and which step is most often missed?

Bolt the two holding sides to the loading board using the four M6 screws and cage nuts for 19-inch rack rails, then secure with the four M5 screws and nuts; the included wrench is required for the M5 nuts, which installers frequently forget to tighten.

What parts might need replacement after extended use?

The M6 cage nuts and M5 nuts can strip or loosen over time, and the 1.2 mm steel holding sides may bend if loads exceed the 22-pound rating, so keep spare hardware on hand.

What is the first limit reached during sustained loading?

The 22-pound weight capacity is the primary limit; exceeding it risks permanent deformation of the 1.2 mm thick holding sides even though the front reinforcing rib adds rigidity.

More in Rack Cabinets & Shelves

Similar items