We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel 3U vertical wall-mount rack bracket, 19.29 inches wide, pre-assembled with cage nuts

StarTech.com MFT-VW04UBB 3U 19in Vertical Wall Mount Rack Bracket

SKU CH-YJHF-9YZVE

A 3U steel bracket mounts 19-inch network gear vertically on a wall or under a desk, supports 35 lb, and folds 62 % smaller for shipping

  • Rack height42U
  • Load capacity35 lb (15.9 kg)
  • Spec summary3U, Metal, Rack Mount, 3.54 L x 19.29 W x 5.81 H inches
  • Standards met3U
  • Product dimensions3.54 in × 19.29 in × 5.81 in
  • Product weight0.534 kg
  • Space-saving vertical mounting fits 3U in 19.29" width
  • Pre-assembled bracket installs in four steps with included M6 hardware
  • Solid steel construction supports 35 pounds of equipment
  • Foldable packaging reduces shipping volume by 62 percent
  • Horizontal under-desk option suits small office and home setups

Space-Saving Vertical Mount

The StarTech.com MFT-VW04UBB is a 3U 19-inch steel bracket that mounts standard rack equipment vertically on a wall or horizontally under a desk. It targets installers who need to deploy switches, firewalls, patch panels or modems in tight small-office or home-office spaces without a full cabinet.

35-Pound Capacity in 3U

The bracket supports up to 35 pounds of gear across three rack units, providing enough headroom for a typical network switch plus a patch panel or a compact firewall appliance. Heavier multi-unit servers or dense UPS modules will exceed the rated limit and require a floor-standing rack instead.

Pre-Assembled Steel Build

The unit ships fully assembled with a complete set of M6 cage screws and nuts for equipment mounting plus four M5 screws for wood surfaces. Its folding design reduces packaging volume by 62 percent for easier transport, while the solid steel construction meets EIA-310-E 19-inch spacing for broad compatibility.

How it compares

Measured against everything we stock in Rack Cabinets & Shelves, at today’s prices. Recalculated every night.

Price $32.99
Cheaper than about 87% of the 2,764 comparable items (median $106.99).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameStarTech.com
Model nameMFT-VW04UBB
Part numberJCM-VWRF
Product colorBlack
Size & build
Rack height42U
Main materialSteel
Load capacity35 lb (15.9 kg)
Product dimensions3.54 in × 19.29 in × 5.81 in
Product weight0.534 kg
Packed dimensions5.5 cm × 10.9 cm × 44.7 cm
Weight with packaging0.71 kg
Environment & compliance
Standards met3U

Questions about this item

Will this 3U bracket hold a 35-pound switch alongside my existing 19-inch patch panel?

The bracket supports up to 35 pounds and fits standard 19-inch rack equipment, so a switch of that weight can mount beside a patch panel in the same 3U space.

How can I verify the bracket is mounted securely after installation?

Confirm the four M5 wood screws are fully seated in studs or solid blocking, then check that the steel frame does not flex when you press on the mounted gear.

Does the package include the M6 screws and cage nuts needed for my rack-mount gear, or must I buy them separately?

A full set of M6 screws and cage nuts is included, plus four M5 screws for wood surfaces, so no extra hardware is required for typical equipment mounting.

More in Rack Cabinets & Shelves

Similar items